Mayan Natural Slate All-in-one Realridge - Hip End 120

Graphite A premium fully vented, rapid dry fix, interlocking hip end with built in ventilation strip and invisible fixings, available for any angle of pitched roof. The mayan all-in-one realridge system is a one-of-a-kind, modern ridge solution for slate roofing. Using the unique, patented dry-fix built-in connector system and screw fixings provided, they are extremely easy to install and give an outstanding, sleek, modern yet natural look to the roof. The pre-installed vent system easily provides ventilation which cannot be compressed and mean a roll-out kit is not required. It also conforms to the requirement for high level ventilation bs5250 and as per nhbc standard 7.2. And is compliant with bs 5534 ands bs 8612. The innovative, patented mayan roofing systems exclusive design is available in a wide range of angles with ridge tile, block end and hip end options. When used in the hip application, it is normal practice to use a hip that is one angle wider than the ridge being used. If in doubt of the angle, always choose the shallower angle e.G. Out of 105 and 90 , choose 90 . The angle of the ridge point can be measured with an angle measurer to determine the ridge angle required. Our angles are the true internal angle of our ridges in degrees. When measuring the angle, the stacking of the slates either side will add a few degrees to the true angle, so it’s best to measure the angle when the slates are installed, where the ridge will sit, rather than just the rafters. ... Brand: Mayan Shipping Cost: DKK 25.00

Graphite A premium fully vented, rapid dry fix, interlocking hip end with built in ventilation strip and invisible fixings, available for any angle of pitched