Elta 149s-a1729 Multi-range Run-on Timer 5a

The elta 149s-a1729 rt5a is a surface mounted, multi-range run-on timer for single phase fans up to 5a. Triggered from a light switch or other switched live, it keeps the fan running for a set time, adjustable up to 4 hours across four ranges.It runs on 230v single phase 50hz, works in resetting or non-resetting mode selected on dil switches, and measures 86 x 86 x 32 mm. Run-on timer up to 4 hours 5a single phase resetting or non-resetting what it is best used fortoilet, washroom, bathroom and kitchen extract triggered by the lights, so the fan clears the room after it is used, plus plant rooms, stores and drying rooms where a fan should run for a fixed time after a switch is pressed. The 4 hour range suits longer purge or drying duties.It is a timer only, with no humidity sensing and no speed control, and it is for single phase fans up to 5a in total. For humidity triggered run-on, use a humidistat for larger fans, use a contactor or a dedicated controller.Why choose this over alternativesthe 149s-a1729 can be set anywhere up to 4 hours, in resetting mode run-on starts when the light goes off or non-resetting mode runs for the set time from switch-on , and one timer can switch several small fans up to 5a combined, for example two or three vl150 inline fans serving a washroom.Where the fan should respond to humidity rather than the light switch, the elta sen-hy-i humidistat with 1 to 25 minute timer is the alternative.Installation notes check the timer can safely switch ...

The elta 149s-a1729 rt5a is a surface mounted, multi-range run-on timer for single phase fans up to 5a. Triggered from a light switch or other