The corefix dot & dab plasterboard fixing anchors 5.0 X 100mm deliver engineered security for heavy loads on dot and dab plasterboard installations. Designed to bridge the cavity gap inherent in dot and dab construction, these anchors transfer load directly to the brick or block substrate behind the board. The patented zinc-plated steel tube insert ensures reliable anchorage across varying cavity depths. Installation requires only standard tools: a drill with 10mm bit, hammer and pz2 screwdriver, enabling rapid deployment in residential and light commercial applications. Compatible with brick, block and lightweight concrete substrates, these fixings accommodate maximum fixture thickness of 10mm. The zinc-plated finish provides corrosion resistance for clean, dry, low-humidity environments, ensuring long-term installation integrity. Features & benefits: patented design bridges dot and dab cavity gaps for direct load transfer to masonry substrates. Zinc-plated steel tube insert delivers reliable anchorage and corrosion resistance in dry environments. Quick installation using standard tools: drill, 10mm bit, hammer and pz2 screwdriver. Suitable for securing cupboards, brackets and heavy fixtures to dot and dab plasterboard or batten-supported board. Compatible with brick, block and lightweight concrete wall types. Core insert size: 8.0 X 50mm. Screw size: 5.0 X 100mm. Minimum drill hole depth: 100mm. Pack quantity: 4.
BradfordsWebDelivery 1-4 days | Cost: 10+£ 5.89