- The special controlled screen return spring mechanism for the hapro csr is very strong. It retracts the projection surface quickly for the first part and then slows down to roll into the case smoothly.- The hapro csr needs to be fully extracted. There are no intermediate stopping positions.- Easy to mount onto a wall or ceiling thanks to the easy install system.- The case and the projection screen surface can be made to exactly the right size and the case and slat bar are available in any colour for optimal integration into any interior.- The triangular slat bar retracts into the case for a clean finish.- Shorten or reduce the width of the projection screen surface.- Shorten the case and shorten or reduce the width of the projection screen surface.- Paint the case. Slat bar and plastic components in a different ral colour. When the screen needs to match a specific colour scheme. We can paint the case in any colour specified.- Reverse installation of the surface so that the projection side is located to the rear. Specify this method when the projection screen surface needs to exit the case reversely because the normal screen path is obstructed by an obstacle or because the case is to be mounted to a beam. Note that there are two reverse installation options. The projection screen fabric can either be configured to exit the case at the front or the mounting brackets can be mounted in reverse. Indicate clearly what your requirement is so that projecta can produce the scree...
PcHub.UKWebDelivery 3 days | Cost: £ 4£ 1,059.16£ 1,270.9817%