Oxide red
75 X 75mm
Bolt-down post shoe quick-fit, oxide red provides a fast, reliable way to secure timber posts to existing concrete, brick or timber bases without digging or casting new footings. The quick-fit clamping design locks the post in place with minimal tools, while the wide bolt-down base spreads load for a rigid, above-ground installation that helps protect post ends from moisture. Key features & benefits quick-fit clamping: fast to position and tighten for a secure, twist-resistant hold. Bolt-down base: pre-drilled plate fixes to concrete, brick or timber substrates. Protects timber ends: raises posts off the ground to reduce rot risk. Durable finish: oxide red coating for corrosion resistance and a clean appearance. No-dig solution: ideal where excavation would damage paving or services. Product & technical details type: bolt-down post shoe quick-fit clamp material: heavy-gauge steel finish: oxide red coating fixing to substrate: anchor bolts screws through base plate not included typical applications: fencing, pergolas, carports, handrails, decking balustrades instructions for use mark out and drill the substrate for suitable anchors clear dust from holes. Bolt the shoe down firmly and verify plate sits flat and level. Insert the timber post fully square and plumb it, then tighten the quick-fit clamp evenly. Re-check alignment and re-tighten after initial settling inspect periodically in service. Limitations & precautions select anchors and shoe size to...
Brand: DIY Refurb
Oxide red
75 X 75mm
Bolt-down post shoe quick-fit, oxide red provides a fast, reliable way to secure timber posts to existing concrete, brick or
