Complies with ieee 802.3, Ieee 802.3U 10 100base-tx, 100base-fx standard connectors: one rj45 auto-mdi mdi-x twisted pair, eia568 one fiber-optic, 1310nm wavelength, connector type and distance vary with model ft-806a20 ft-806a60: tx-1310nm, rx-1550nm ft-806b20 ft-806b60: tx-1550nm, rx-1310nm data transfer rate: tp: 10 100mbps fx: 100mbps duplex mode support: full or half-duplex mode by auto-negotiation tp full or half-duplex mode by dip switch fx led indicators: pwr, fx lnk act, fx fdx col, tp 100, tp lnk act, tp fdx col dip switch: 2 dip switches rear dip switch: fx duplex mode selection side dip switch: lfp link fault pass-through mode selection ieee 802.3X full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets planet ft-80x is a fast ethernet bridge 100base-fx fiber to 10 100base-tx shielded twisted pair stp converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the stp port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100mbps bandwidth. An override switch provides total manual control over the half full-duplex operation, in fib...
Brand: Planet
Complies with ieee 802.3, Ieee 802.3U 10 100base-tx, 100base-fx standard connectors: one rj45 auto-mdi mdi-x twisted pair, eia568 one fiber-optic, 1310nm wavelength, connector type and
