The bearing press & extraction tool bpet is designed for the home mechanic’ for use on linkage bearings’, however it still works on many pivot and hub bearings.This tool is designed for the competent home mechanic who has reasonable knowledge and experience of working on bikes. This tool is designed to extract and insert linkage bearings, however the tool can also be used to press and extract bearings on some hubs and freehub bodies note: all bearing kit adaptors are sold separately. Bearing kits 1, 2 & 3 don’t have male adaptors just female ones due to the small size of the bearing bore hole. Bearing press tool is not included with any bearing kit. Instructions for usefirstly, ensure you have the correct rrp bearing kit to match the bearings you intend to insert extract see list below . You can identify which kit you need either by reading the bearing number written on the rubber seal, or you can measure the inner bore race and outer race of the bearing as shown below and match it to our list below nb: the handle arms have been reduced in length and thickness to decrease the torque available reducing the risk of damage from misalignment incorrect installation extracting bearings red adaptors
Sold separately place the red adaptors from your rrp bearing kit as shown below, take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame. In particular check that the female adaptor cup is flush on the frame to prevent frame damage. ...
Brand: RRP
Type: new
Shipping Cost: DKK 0.00
Delivery Time: 3 to 4 days
The bearing press & extraction tool bpet is designed for the home mechanic’ for use on linkage bearings’, however it still works on many pivot
