All categories
Business & Offices
Electronics & Media
Fashion & Accessories
Groceries & Essentials
Health & Personal Care
Home & Living
Kids & Family
Sports & Outdoors
Search in ZoneOffer
If you’ve ever battled stubborn paint, gummy adhesives, or finishes that just won’t level, you’ve met the world of solvents, strippers, and thinners—maybe not by name, but definitely by need. These are the behind-the-scenes heroes that clean, dissolve, and fine-tune coatings so your project turns out smooth and professional. Think of them as the toolkit for everything that happens before and after a coat of paint: from prepping the surface and reviving brushes, to removing crusty varnish and getting that perfect spray pattern.
Solvents dissolve things. They cut through grease, lift residues, and help you clean tools and surfaces. Common examples include mineral spirits (often called white spirit), acetone, denatured alcohol, xylene, and citrus-based cleaners. You’ll use solvents for wiping down wood, degreasing metal, removing sticker residue, and restoring clogged brushes and spray guns.
Strippers are formulated to remove old coatings. They soften or break the bond of paint, varnish, lacquer, and even tough two-part finishes so you can scrape or wipe them off. You’ll find gel, paste, and liquid versions—some fast but harsher, others slower and safer. The right choice depends on the coating and the surface you’re trying to save.
Thinners adjust the viscosity of paints, varnishes, and lacquers for better application. They help achieve a smoother brushstroke, a cleaner spray fan, or quicker cleanup. You’ll see “paint thinner,” “lacquer thinner,” “cellulose thinner,” and specific blends for polyurethane or epoxy. Using the wrong thinner can ruin a can of paint in one pour, so matching product to coating matters.
There isn’t a one-size-fits-all liquid for every job. Choosing the right solvent, stripper, or thinner is like choosing the right blade in a multitool—each one shines at a particular task. Here’s how the most common options stack up in everyday projects.
Mineral spirits is the go-to for degreasing metal, cleaning oil-based paint from brushes, and prepping surfaces before finishing. It’s less aggressive than lacquer thinner, with a slower evaporation rate that gives you time to work. For wiping down wood before staining, many pros prefer mineral spirits because it clears dust and oils without raising the grain. It’s also often used to thin traditional oil-based paints, though modern coatings may specify a brand-specific thinner—so always double-check the can.
Acetone is the speedster in the pack. It flashes off quickly, which makes it great for removing residues from glass and metal, de-waxing surfaces, and cleaning up adhesive spills. It can melt or mar plastics and lacquer finishes, so test first. If you’re dealing with dried-up nail polish, epoxy smudges, or uncured polyurethane glue, acetone often saves the day—but ventilate well, because those fumes are no joke.
Denatured alcohol is brilliant for dissolving shellac and cleaning spirit-based dyes. It evaporates fast and leaves minimal residue, which is why woodworkers love it for wiping down between coats. It also removes some marker and ink stains from non-porous surfaces. On finished furniture or delicate veneers, spot test—alcohol can dull or soften certain coatings.
These are powerful blends for dissolving lacquer, cleaning spray equipment, and thinning fast-drying coatings like nitrocellulose lacquer. They evaporate quickly and aggressively, which is a blessing for smooth finishes but a curse around plastics and rubber. Use them to clean spray guns that atomize lacquer, and to erase overspray from metal parts before it sets.
When you’re fighting heavy-duty adhesives, mastics, or industrial coatings, xylene and toluene bring the muscle. They’re strong, slow-evaporating, and excellent for deep, stubborn residues. Because they’re potent, reserve them for tough jobs on robust surfaces like steel and masonry, keep the air moving, and wear appropriate protection.
If you prefer a less aggressive, low-odor route, citrus-based and soy-gel removers are popular. They cling to vertical surfaces, work over longer dwell times, and have a friendlier smell than classic strippers. They’re great for indoor trims, stair parts, and furniture where you can afford a longer wait for safer, steadier results. If the coating is thick or ancient, you may need multiple passes—but the trade-off in comfort can be worth it.
Caustic strippers (often lye-based) can chew through multiple paint layers and are particularly effective on old oil paints. Many newer biodegradable blends aim to balance strength and safety, avoiding old-school chemicals while still lifting stubborn finishes. These options tend to work best when you cover them to keep them moist and allow ample dwell time—think hours, not minutes.
Two-part coatings and high-performance urethanes need specific thinners for mixing, cleaning, and flow-out. A generic “paint thinner” won’t cut it. Look for products labeled for PU or epoxy systems. You’ll use these both during application—especially for spraying—and for cleaning tools before the coating hardens. After cure, removal becomes a separate project entirely.
Picking a solvent or stripper should feel logical, not like a coin toss. Narrow it down by surface, coating, and the result you want. A quick mental checklist saves time, money, and a lot of sanding.
Wood calls for products that won’t raise grain too much or stain the fibers. Mineral spirits and safer gel strippers are common picks. On metal, fast-evaporating solvents like acetone or lacquer thinner remove oils and overspray without swelling anything. Masonry tolerates strong strippers and xylene-level solvents, but remember porous surfaces drink in liquids—work in smaller sections. Plastics are tricky; many strong solvents will craze or melt them, so use plastic-safe cleaners or mild citrus-based products and test in a hidden spot.
Latex usually cleans with water when fresh, but once cured, you may need a dedicated latex remover or a more aggressive stripper. Oil-based paints clean with mineral spirits while wet; cured layers respond to strippers and heavier-duty solvents. Varnish and shellac each have preferred removers—denatured alcohol dissolves shellac, while many strippers will soften varnish. Epoxy and catalyzed finishes demand specialized strippers or a serious sanding plan.
If you’re cleaning brushes used with oil paint, mineral spirits is the classic. For removing layers of old paint, grab a gel or paste stripper that clings. For thinning coatings, match the thinner to the paint type exactly as specified. For degreasing automotive or metal parts, acetone or xylene work fast—just remember fume control and fire safety.
Solvents and strippers are powerful because they react quickly. That same power can irritate skin, eyes, and lungs, and some are flammable. With a few common-sense habits, you can work safely and confidently.
Work with windows open, fans running, and doors cracked when possible. Cross-ventilation is your friend. For enclosed areas—like stripping a stair banister—set up a box fan to exhaust air outward and pull in fresh air from another window. Outdoors, avoid stagnant corners or placing open cans near ignition sources. If fumes still build up, consider a respirator rated for organic vapors.
Gloves prevent loads of problems. Nitrile or chemical-resistant gloves keep solvents from drying or irritating your skin. Safety glasses or a face shield protect against splashes during scraping and brush cleaning. If you can smell it strongly and the room feels stuffy, that’s your cue for better ventilation or a respirator. Keep a roll of paper towels handy and a metal container with a tight lid for solvent-soaked rags.
Many solvents are flammable. Keep them away from pilot lights, heaters, and sparks. Close containers the moment you pour what you need. Store in a cool, dry place in original containers with labels intact. Lay oily or solvent-wet rags flat outside to dry, or submerge in water in a lidded metal can—crumpled rags can self-heat. Never smoke while using these products, and avoid open flames or grinding tools nearby.
Stripping a finish doesn’t have to be misery. A little patience and the right technique transform it from a slog into a surprisingly satisfying reveal.
Protect floors with heavy-duty drop cloths and tape off edges you want to keep clean. Use a plastic spreader or natural-bristle brush to apply stripper. Always test a small, hidden area first—different finishes react differently. If the coating wrinkles and softens in minutes, you’re on the right track. If nothing happens, try a stronger product or plan for more time.
Lay on a thick, even coat—don’t skimp. Strippers need body to work. For vertical surfaces, gel or paste formulas cling better. Covering the stripper with plastic film can slow evaporation and boost effectiveness, especially on old, brittle paint. Once the finish bubbles, use a plastic scraper to lift it off in ribbons. On intricate moldings, a nylon brush or brass brush reaches into details without gouging.
After scraping, follow the product’s cleanup directions—some require a neutralizing wash, others a solvent wipe-down. Wipe the surface until residue is gone and let it dry fully before sanding or refinishing. Rushing this step can lead to adhesion issues with your new coating. As a ballpark, many projects need a dry time of a few hours, sometimes overnight, depending on humidity and airflow.
Thinning is less about “more is better” and more about “just enough.” The sweet spot keeps your paint flowing without sacrificing coverage, sheen, or hardness.
Every coating has a recommended thinning range, often expressed in percentages or parts per gallon. Start at the low end and mix thoroughly. Stir for a couple of minutes, let air bubbles settle, and test on a scrap piece. If you’re spraying, adjust both the thinner percentage and the gun settings in small steps. Tiny changes—like a teaspoon per quart—can make a big difference.
Oil-based enamels and varnishes often thin at around 5% to 10% by volume with mineral spirits or a specified thinner. Lacquers can go higher depending on temperature and equipment. As for coverage, many paints list around 300 to 400 square feet per gallon at proper viscosity; aggressive thinning can drop that, so watch your math. The goal is flow and leveling without sacrificing build.
For brushing, if marks persist even with the right thinner, switch to a higher-quality natural-bristle brush or a softer synthetic designed for your coating. For spraying, orange peel often comes from paint that’s too thick, air pressure that’s too low, or holding the gun too close. Make small tweaks: add a splash of thinner, bump the pressure slightly, and keep your passes around 8 to 12 inches from the surface.
If you’re working indoors, around family, or in cooler seasons with closed windows, low-odor and greener options can make the job more pleasant without sacrificing results.
Modern water-based degreasers and cleaners use surfactants to lift oils and grime from surfaces and tools. They shine for cleaning latex paint from brushes while it’s still wet, wiping down walls before repainting, and maintaining sprayers after waterborne jobs. Some even cut through light oil residues on metal with a bit of scrubbing—no harsh fumes necessary.
Low-VOC thinners are formulated to reduce odor and emissions while maintaining performance. You’ll also find NMP-free, methylene-chloride-free strippers that work over longer dwell times but with far less harshness. They’re ideal for kitchens, staircases, and furniture refinishing where comfort and safety matter as much as speed.
Budget matters, especially on big projects. But the cheapest bottle isn’t always the best value. Look for product strength, coverage, and cleanability. A pro-grade stripper that removes three layers in one pass may beat a bargain option that needs multiple rounds. And because brands package these products in a range of sizes, comparing cost per ounce is the smart play.
You’ll commonly see solvents and thinners sold in 16-ounce, 32-ounce, 1-quart, and 1-gallon containers. For occasional use, a quart may be plenty, and you’ll minimize leftovers. For furniture stripping or whole-room prep, a gallon or two gives better value per ounce. Calculate your expected coverage—some gel strippers cover around 50 to 100 square feet per quart depending on thickness and the number of layers—and buy accordingly.
When you know you’ll use a product frequently—like mineral spirits for regular brush cleaning—multi-buy deals or pro-grade packages often save money. Keep an eye out for bundled kits that include scrapers, pads, and neutralizers with the stripper itself. That convenience can shave hours off a project and prevent multiple trips for missing items.
Comparing products and prices across multiple retailers can be time-consuming. A comparison site like ZoneOffer helps by gathering offers in one place so you can weigh pack size, specifications, and price at a glance. That way, you spend less time hunting and more time getting the job done—without overpaying.
A little routine care saves a lot of money. Clean tools promptly, store products correctly, and your next project will start on the right foot.
For oil-based coatings, spin out excess paint first, then work mineral spirits through the bristles until the rinse runs clear. Comb the brush to straighten bristles and hang it to dry. For lacquer work, clean with the right lacquer thinner and rinse quickly to prevent brush damage. Rollers are cheap to replace, but if you keep them, massage solvent through, squeegee with a roller tool, and store them wrapped in plastic once dry to keep lint down.
Freshly stripped wood is thirsty. After cleaning and drying, sand lightly with fine grit to remove raised fibers. If you won’t refinish immediately, seal with a dewaxed shellac wash coat or primer to lock out moisture and fingerprints. Bare metal flashes with rust in humid air; wipe it with acetone, then apply a rust-inhibiting primer within a few hours for best results.
Decant small amounts into working containers and keep the main can sealed tight. Wipe the rim before closing so the lid seals properly and doesn’t fuse shut. Label everything with the date opened. Store cans off the floor on a shelf away from heat sources, ideally in a metal cabinet. If a product thickens over time, don’t force it back with random solvents—check the label for the correct thinner or responsibly dispose of it.
Ready to level up? A few pro habits can improve results dramatically, especially on detailed work, vintage restorations, and spray applications.
When you’re restoring a piece with history, strip in layers rather than blasting everything at once. This helps you identify what’s under there—dyes, inlays, veneer patches—and reduce the risk of damage. Gentle gel strippers and plastic scrapers keep the substrate safe. If you find shellac, denatured alcohol may let you dissolve and wipe instead of scraping.
Solvents flash faster in warm, dry airflow. If your lacquer is drying too quickly and showing overspray dust, reduce the air movement or add a touch more lacquer thinner to improve melt-in. Conversely, if drying is too slow and collecting dust nibs, increase airflow and temperature within safe limits. Aim for a comfortable room around 65 to 75°F with steady ventilation.
For spraying lacquers and enamels, strain the coating through a paint filter before it goes into the gun. Start with the manufacturer’s recommended nozzle size and pressure, then fine-tune with small changes. If you get tails on the fan pattern, pressure may be too low or the paint too thick; if you get excessive bounce-back, pressure could be too high. Practice on cardboard at 8 to 12 inches to lock in your distance and speed.
Even experienced DIYers slip up. Avoid these pitfalls and you’ll save yourself a ton of rework.
Never assume all thinners are interchangeable. Using lacquer thinner in an oil-based varnish can cause cloudiness, slow cure, or a gummy mess. Always match the thinner to the specific coating, not just the category name.
After stripping, leftover residue can sabotage adhesion. Wipe until your cloths stay clean and the surface looks even and dry. If your new finish fish-eyes or crawls, suspect contamination and clean again.
If a coating sags, it’s often too wet or applied too heavily—not necessarily too thick. Try lighter coats and better brush control before dumping in more thinner. For spray, adjust your speed and overlap first.
Pro-grade products are strong, fast, and sometimes unforgiving. DIY-friendly versions are slower and more forgiving but can take longer. Choose based on your timeline, ventilation, and how delicate your surface is.
When you’re removing multiple layers from doors, railings, or exterior trim, a stronger stripper may save hours. Just be prepared with proper PPE, active ventilation, and a plan for cleanup.
For indoor furniture, cabinetry, and trim where time isn’t tight, gentler gel strippers and low-odor solvents keep the process manageable. They work best with patience—thicker applications, plastic wrap to extend dwell time, and a second pass if needed.
Solvents, strippers, and thinners might not get the spotlight, but they’re the backbone of any clean, durable, and professional-looking finish. Choose by task and surface, work safely with smart ventilation and PPE, and match your thinner to the coating every time. Keep a few staples on hand—mineral spirits for cleanup, a trusted gel stripper for layered paint, and the proper thinner for your favorite finish—and you’ll handle almost any project with confidence. And when you’re ready to buy, use a comparison site like ZoneOffer to quickly scan deals, sizes, and specifications so you get the right product at the right price without the guesswork.
| Solvents, Strippers & Thinners | Price | |
|---|---|---|
| Elite Flex Working Gloves - Str. 10 | kr. 15,95 | |
| Häxan Häxan Køkkenrent 650 Ml 7350125390108 Equals N A | kr. 39,- | |
| Häxan Häxan Hällrent Hob Cleaner 200 Ml 7350125390122 Equals N A | kr. 39,- | |
| Muc-off Bike Wash Spray 1l | kr. 75,- | |
| Brunox Turbo Clean Spray 500ml | kr. 89,- | |
| Finish Line Citrus Degreaser Spray To Gear - 355 Ml | kr. 89,- | |
| Meguiars Foaming Bug Remover | kr. 99,- | |
| Refectocil Tint Remover 150 Ml | kr. 104,25 | |
| Ventilhåndtag To 10 Past, The Laws 16 Liter Battery Powered Syringes Additional Or Spare | kr. 159,- | |
| Finish Line Chain Cleaner Including. Degreaser Past, The Laws Oil | kr. 229,95 |
