All categories
Business & Offices
Electronics & Media
Fashion & Accessories
Groceries & Essentials
Health & Personal Care
Home & Living
Kids & Family
Sports & Outdoors
Search in ZoneOffer
If you’re redesigning a bathroom or planning new construction, in-wall carriers and mounting frames are the unsung heroes behind sleek, wall-hung toilets, sinks, and vanities. Think of them as the hidden skeleton that holds everything steady — a rugged metal frame anchored inside the wall that supports fixtures and conceals plumbing. Instead of bulky floor-mounted bases, these carriers let fixtures float, giving a clean, modern look while making floor cleaning a breeze.
Curious why wall-hung toilets and sinks are suddenly everywhere? It’s not just the look. In-wall carriers deliver real benefits: they save floor space, allow adjustable fixture height, and hide unsightly pipes. For homeowners and designers aiming for minimalist bathrooms or tight powder rooms, a carrier system can be a game changer. Plus, because the framework takes the load, porcelain fixtures can sit slimmer and lighter without compromising on strength.
Wall-hung fixtures mounted on in-wall carriers free up visual and physical space. They make cleaning the floor under the toilet or sink effortless and give bathrooms a spa-like feel. Maintenance is simplified too — modern flush plates and access panels provide a tidy service point so you don’t have to break walls to reach the cistern or connections.
Don’t let the delicate look fool you: reputable in-wall carriers are built to take a lot of weight. Most quality carriers are rated to support at least 880 pounds, with heavier-duty models rated well over 1,000 pounds. That means a properly installed carrier will comfortably hold the fixture plus dynamic loads, so stability and safety are not afterthoughts but design standards.
In-wall carriers come in several flavors, each tailored to a particular fixture and installation context. Choosing the right type comes down to what you’re mounting — a toilet, sink, bidet, or vanity — and whether you’re working in a new build or doing a retrofit.
Toilet carriers typically integrate a concealed cistern and are designed to fit between studs or in front of an existing stud wall. Typical frame depths range from about 5" to 8", and heights often vary from roughly 20" to 40", depending on whether you need a compact or full-height unit. Drain connections usually accept 2" or 3" waste pipes, and supply lines are commonly 1/2". These frames are adjustable so you can set bowl height anywhere from the standard 15" to 19" or higher if desired.
Wall-hung sinks and vanities need sturdy frames too. These mounting frames spread the load across studs and can be hidden behind drywall or a finished surface. They’re especially useful for floating vanities that carry heavy countertops or drawers. Look for frames with adjustable brackets and a load rating that exceeds the expected combined weight of the fixture and its contents.
Carriers for bidets and urinals are similar to toilet frames but are sized and configured for different outlet and supply locations. They usually accept the same 1/2" supply fittings and 2" waste lines and provide the same robust support and concealed installation benefits as toilet carriers.
When you’re comparing carriers, material and finish matter. Most frames are made from powder-coated steel or stainless steel to resist corrosion and stand up to moisture in the wall cavity. Bolts and fasteners should be plated or stainless to prevent rust, and plastic components like cistern liners should be thick and impact-resistant. Good engineering — bracing, crossbars, and adjustable feet — makes installation faster and gives a longer service life.
Picking the right in-wall carrier is a mix of measuring, planning, and understanding your walls and plumbing. Start with the fixture type, then match frame dimensions, load rating, and connection locations to your project. Here are the practical factors to weigh before buying.
Walls vary: new framed walls with 2x4 studs (actual 1.5" x 3.5") typically leave 3.5" depth, but you may have a finished cavity deeper than that. Measure the available depth, width, and height in inches. Also check stud spacing — many homes use 16" on-center studs — and be sure there’s enough room to fit a 5"–8" deep frame if needed. If you plan to mount a flush plate, confirm the access opening will align with the cistern.
Match the carrier’s outlet to your existing waste and soil pipe size. Common sizes are 2" and 3" for wastewater, while supply lines are usually 1/2". If you’re converting from a floor-mounted fixture, you may need an adapter or a new riser. Also check whether the frame allows the drain angle and horizontal offset you need for your layout.
Installing an in-wall carrier is achievable for a handy DIYer, but it’s a job where planning prevents costly mistakes. The frame must attach solidly to floor and studs, plumbing connections must be watertight, and the finished wall must maintain access to the flush or service plate. Below are practical tips that reduce headaches.
Anchor the frame into the floor and into studs using heavy-duty anchors or through-bolts. If the wall is a stud cavity, cross-bracing or blocking might be needed to ensure you have an anchor point every 16" or so. Think of the carrier like a bookshelf bracket — if the anchor point is weak, the whole shelf fails. Use lag bolts or structural screws rated for the load and the substrate.
Use proper solvent welding or mechanical couplings for waste pipes, and high-quality compression fittings or soldered joints for water supply where applicable. After installation, pressure test water supplies and run a leak test on the cistern and waste lines. A small drip behind a wall can become a major mold and repair problem, so take the time to do the tests before closing the wall.
Retrofits are trickier because you’re working with existing walls and finishes. In many retrofit situations, low-profile carriers that mount in front of studs are the best option, or you can build a false wall to hide the frame. In new builds, you can set the carrier depth and bracket positions before drywall goes up, making installation cleaner and often less expensive in labor.
Don’t forget the extras that make a carrier system work well. Flush plates come in many finishes and act as the access door for the cistern. Protective housings and foam jackets reduce noise and condensation. Mounting bolts, isolation fittings, and extension brackets adjust the carrier to your exact layout. If you’re installing in a high-moisture area, look for water-resistant drywall around the carrier.
Prices vary widely based on brand, features, and build quality. Expect entry-level carriers to start around $120 to $200, mid-range frames $200 to $450, and premium systems — including integrated concealed cisterns and high loading ratings — from $450 to $900 or more. Remember to budget for complementary items: flush plates, mounting hardware, and any changes to waste piping or supply runs.
Certain brands have built reputations for reliability and spare-part availability, which can be worth the premium if you want long-term peace of mind. If the bathroom is a high-use family bathroom or a commercial restroom, investing in a heavy-duty carrier and a good warranty can save you money and stress later. For powder rooms or guest bathrooms, a mid-range unit often provides the best value.
Once installed, maintenance is straightforward. Use the flush plate access to service the cistern or replace parts when needed. Check the mounting bolts annually and watch for unusual noises or wobble. Treat the carrier like a concealed appliance — it needs occasional attention, but with a solid install it should be trouble-free for many years.
Before you hit checkout, run through a quick checklist: measure cavity depth and stud spacing in inches, confirm waste and supply sizes, confirm load rating meets expected use (aim for at least 880 pounds), check for service access via flush plate, and review warranty and spare part availability. Taking these steps up front makes installation smoother and avoids last-minute surprises.
In-wall carriers and mounting frames are a small investment that can dramatically improve bathroom design, accessibility, and ease of cleaning. Whether you’re planning a high-end remodel or a functional update, picking the right carrier, matching it to your plumbing, and installing it carefully will deliver a reliable, modern bathroom that lasts. Ready to make your fixtures float and your space breathe? Start by measuring in inches, matching pipe sizes, and choosing a frame rated for the job.
Conclusion: When you combine the right in-wall carrier with thoughtful installation and quality accessories, you get a bathroom that looks cleaner, feels more modern, and is easier to maintain. Use the guidance above to choose a frame that fits your space, supports the load, and aligns with your plumbing layout — and don’t skip the testing step before you drywall. A bit of planning saves a lot of headaches later.
In-Wall Carriers & Mounting Frames | Price | |
---|---|---|
Bathroom Accessories Mounts Blue Metal - Plastic | kr. 1.212,- |