All categories
Business & Offices
Electronics & Media
Fashion & Accessories
Groceries & Essentials
Health & Personal Care
Home & Living
Kids & Family
Sports & Outdoors
Search in ZoneOffer
If you’ve ever wrestled with a dull or wrong-type saw, you know the feeling: splintered edges, crooked lines, sore hands, and a job that takes twice as long. The right saw turns a tricky task into a smooth, satisfying cut—like a hot knife through butter. Whether you’re trimming plasterboard, slicing plastic conduit, shaping molding, or tackling metal bar, choosing wisely saves time and delivers cleaner results. In this guide, we’ll walk through popular options—especially standouts like the CK Mini Hacksaw 6 Inch, CK 12 Inch Hacksaws, CK Plasterboard and Sabretooth saws, the CK Coping Saw set, the CK Tri‑cut Handsaw 22 Inch, and the compact CK Minisaw & Mitre—plus a few smart buying tips to help you compare offers with confidence.
Hand saws shine when you want control, low noise, and quick setup. They’re perfect for one-off cuts, trim work, tight spaces, or any job where accuracy and finesse beat raw speed. Handheld circular saws, on the other hand, are your go-to when you need straight cuts through boards or sheet stock fast. They’re fantastic for repeatable rips and crosscuts, especially when paired with a guide or mitre system. Think of hand saws as your surgeon’s scalpel and handheld circular saws as your power-packed workhorse—each has a moment to be the hero.
Teeth per inch (TPI) and tooth geometry determine how a saw behaves. Fewer, larger teeth cut faster but leave a rougher finish—great for quick demolition or soft woods. More, smaller teeth cut slower but cleaner—ideal for fine finish work and plastics. Hacksaws for metal use fine-tooth blades designed to slice through steel tube and bar with minimal burr. Plasterboard saws use aggressive teeth to tear through gypsum without clogging. Coping saws use thin, tensioned blades that turn on a dime for delicate profiles. Match teeth to material, and you’ll get better cuts with less effort.
CK has a reputation for practical, job-ready saws that feel balanced in the hand and hold up under pressure. If you’re browsing deals, you’ll see familiar names across the range: compact hacksaws, quick-change frames, drywall cutters, coping saws, and big, general-purpose hand saws for woodworking. Below, we break down what each model is best at so you can pick the right tool the first time.
Compact and nimble, the CK Mini Hacksaw 6 Inch is made for tight quarters—under sinks, inside cabinets, or anywhere a full-size frame won’t fit. It’s excellent for trimming bolts, cutting threaded rod, shortening PVC or copper pipe, and making small, accurate cuts in metal and plastic. Because the blade is short and the frame is rigid, you can keep cuts straight with minimal wander. It’s the kind of tool you toss in your bag and end up using far more often than you’d expect.
If you cut metal regularly, a 12 inch hacksaw is non-negotiable. The CK Hacksaw 12 Inch delivers the reach and stability you need for larger stock—steel angle, conduit, bar, and pipe. Look for solid blade tension, a comfortable grip, and a sturdy frame that resists flexing. With the right blade fitted, you can also handle plastics neatly. It’s the versatile workhorse you reach for when sparks from a grinder aren’t welcome and precision matters.
When cuts get tougher and the workpiece gets harder or thicker, the Heavy Duty version earns its keep. A stiff frame, high blade tension, and robust handle reduce chatter and blade wander, especially on hard alloys or when you’re pushing through a stubborn cut. If you’ve ever snapped blades on a cheaper frame, you’ll appreciate how a heavy-duty build keeps the blade true, so the set of the teeth can do the work instead of your wrists.
Swapping from a metal-cutting blade to a plastic-friendly blade can be the difference between a perfect edge and a ragged one. The CK 12 Inch Quick Change Hacksaw makes that blade swap fast, so you don’t put it off or “make do” with the wrong teeth. For contractors or DIYers bouncing between materials, the quick-release feature saves minutes on every task—and a surprising amount of frustration over a full day on site.
Also known as a jab saw, the CK Plasterboard Saw is designed to punch in and cut switch boxes, vents, and access panels with control. The pointed tip starts the cut without a pilot hole, while aggressive teeth remove material quickly without clogging. The handle angle and tooth geometry help you steer around lines and corners, leaving edges that are easy to finish. For electricians, HVAC installers, and renovators, it’s a must-have.
The CK Sabretooth Saw brings speed to softer materials—plasterboard, soft woods, insulation panels, and plastics. Its tooth pattern chews through material quickly while maintaining a surprisingly neat finish for the pace. If you’re cutting out large drywall sections, trimming plastic soffits, or shaping soft timber, this saw eats through the job and keeps you moving. Think of it as a “rapid response” option when you need a bigger bite without jumping to power tools.
For scrolls, curves, and coping joints on molding, nothing beats a coping saw. The CK Coping Saw and Assorted Blade Set gives you the thin, tensioned blades required for tight turns and delicate profiles. Swiveling ends let you orient the blade to the cut line, so you can “steer” around complex shapes. With an assortment of blades, you can match tooth size to the wood species and thickness. It’s the finesse tool that makes your trim work look like a pro did it—even if you’re just getting started.
If you want one hand saw for everyday woodwork, the CK Tri‑Cut Handsaw 22 Inch is a terrific pick. The longer plate gives you a generous stroke for efficient cutting, and tri-cut teeth are tuned to start easily, track straight, and leave a clean-ish finish without babying the cut. From trimming studs and sheet goods to cutting fascias and decking boards, a well-designed 22 inch saw can handle most site tasks without breaking stride. Pair it with a square and a sharp pencil, and you’ll be surprised how often you leave the power saw in the van.
Handheld circular saws deliver speed and straightness—especially for sheet materials and repeated cuts. A compact footprint keeps them easy to carry and quick to set up, while modern blade designs help reduce tear-out. If you need fast crosscuts on boards, clean rips with a straightedge, or on-site trimming where a table saw would be overkill, a handheld circular saw fills the gap beautifully.
The CK Minisaw & Mitre is all about controlled, accurate cuts in a compact package. Paired with a mitre guide, it helps you make crisp crosscuts and angle cuts—ideal for picture frames, beading, trim, and small profiles. It’s a neat solution when you want repeatable angles without hauling out bigger gear. For hobbyists and pros working in tight spaces or indoors, this combo offers precision you can carry under one arm.
Metal needs fine-tooth hacksaw blades that resist snagging and deliver a smooth edge. Plastics prefer medium-fine teeth that won’t melt or chip. Drywall thrives on aggressive, open teeth that won’t clog. Soft woods can handle large, fast-cut teeth; hardwoods usually look better after a finer cut. If you’re unsure, start with a mid-range tooth count and test on a scrap. The right blade should cut without forcing, track your line, and leave a finish that matches your tolerance for sanding.
Longer saws—like a 22 inch handsaw—make longer strokes, which means faster, straighter cuts with less effort. Short, compact saws excel in tight spaces and for detail work. For hacksaws, a 12 inch blade is the sweet spot for most metal tasks. For circular saws, consider the maximum cut depth—enough to cleanly slice through common stock you use, whether that’s trim, 2x4 studs, or sheet materials.
Working in a flat? A quiet, dust-light hand saw might be your best friend. On a busy site with bigger volumes? A handheld circular saw can speed up production. If you’re climbing ladders, a compact mini hacksaw or plasterboard saw rides lighter. The less you carry, the more you’ll appreciate tools that punch above their weight—but don’t sacrifice control if you’re making layout-critical cuts.
Need a glass-smooth edge on moldings? Reach for a coping saw or a fine-tooth handsaw. Need to drop a stud down to length quickly? A tri-cut 22 inch hand saw or a handheld circular saw with a sharp blade will do it in a heartbeat. Remember: your finish is only as good as the tool-plus-technique combo. Rushing with the wrong saw often means more sanding or a redo.
Comfort matters. A handle that fits your hand reduces fatigue and helps you steer. Look for non-slip, contoured grips and a balance that lets the saw do the work. With hacksaws, a knuckle guard and a handle that encourages straight wrist alignment go a long way on longer cuts.
On hacksaws, high blade tension keeps the cut true. Quick-change systems reduce downtime and make it easy to pick the right blade for the material. On coping saws, a stout tension mechanism prevents blade flutter, which keeps curves crisp and prevents breakage.
Tri-cut or impulse-hardened teeth on handsaws stay sharp longer and start easily without skating. Aggressive, open-tooth patterns on drywall saws clear debris faster. Coated blades can reduce friction, helping maintain speed and surface quality. These small design touches add up to better feel and cleaner results.
Keep blades dry, lightly oiled, and capped or sheathed when not in use. For handsaws, a simple cardboard sleeve prevents accidental dings. With hacksaws and coping saws, store spare blades flat and protected. A clean blade cuts cooler and straighter; resin and drywall dust can gum teeth and slow you down.
Traditional handsaws with non-hardened teeth can be jointed and filed for a new lease on life. Hardened-tooth saws are designed to stay sharp longer, then be replaced when dull. Hacksaw and coping saw blades are quick swaps—don’t be shy about changing them when performance drops. It’s cheaper than forcing a bad cut and wrecking your workpiece.
Mark your cut clearly, support the work, and keep your hands out of the line of fire. For drywall and plastics, a dust mask is smart; for metal, eye protection is a must. Let the saw do the cutting—if you’re forcing it, your blade might be wrong for the material or simply dull. And always start with a steady, shallow stroke to establish a kerf before you go full send.
Budgets vary, but some price landmarks help you plan. Mini hacksaws typically start around £8 and can run to about £20 depending on build. Standard 12 inch hacksaws sit roughly between £12 and £35; heavy-duty frames can reach £25 to £60. Quick-change 12 inch hacksaws often land in the £20 to £45 range. Plasterboard saws are commonly £10 to £25. Coping saws with assorted blades tend to be £10 to £30. A good 22 inch hand saw might be £15 to £40, depending on tooth hardening and handle quality. Compact mitre-assisted saw kits hover around £15 to £45. Handheld circular saws vary widely—expect anything from £50 to £200+ depending on brand, power, and features. Prices move with promotions, so it pays to compare.
Prices for saws can swing from one retailer to another—sometimes by a surprising margin. Using a dedicated comparison site like ZoneOffer helps you scan live deals across multiple sellers so you can spot the sweet spot between price, brand reputation, and delivery speed. It isn’t a store; it’s a way to see the market at a glance, so you’re not stuck paying more than you need to for the exact same tool.
Not sure where to start? For metal and mixed materials, pair a CK Hacksaw 12 Inch with a CK Mini Hacksaw 6 Inch for tight spots. For drywall-heavy work, grab the CK Plasterboard Saw and the CK Sabretooth Saw for fast sections. For trim, the CK Coping Saw and Assorted Blade Set is your detail weapon. And for general wood cutting, a CK Tri‑Cut Handsaw 22 Inch covers most daily needs. Add a compact mitre solution like the CK Minisaw & Mitre, and you’ve got accurate angles without bulky gear. Combine smart tool picks with sharp blades and good technique, and your cuts will look pro with less effort.
Choosing the right saw isn’t about owning every tool—it’s about matching the blade, frame, and tooth design to the job in front of you. From the nimble CK Mini Hacksaw 6 Inch and tough CK 12 Inch Heavy Duty to the drywall-ready CK Plasterboard and Sabretooth saws, the detail-friendly CK Coping Saw set, and the all-around CK Tri‑Cut Handsaw 22 Inch, you’ve got options that cover almost any task you’ll meet in the workshop or on site. Compare the latest UK deals on a trusted comparison site, keep your blades sharp, and let the right tool do the heavy lifting. Your cuts—and your hands—will thank you.
| Saws | Price | |
|---|---|---|
| Ck Junior Hacksaw | £ 6,08 | |
| Ck Mini Hacksaw 150mm 6 Inch | £ 6,41 | |
| Armeg 51mm Cobalt Vari-pitch Hole Saw | £ 10,28 | |
| Armeg 152mm Cobalt Vari-pitch Hole Saw | £ 42,68 | |
| Contisportattack | £ 107,01 | |
| Contisportattack | £ 120,25 |
