The led lamp with lcd display of 18w 36 is used to harden varnishes and hybrid gels. The uniform arrangement of the diodes allows effective fixing of the manicure, which ensures the desired effect. The lamp is equipped with three curing times: 30 s, 60 s, 99 s and a motion sensor, which ensures maximum comfort of use and 21 leds. The professional device has two intelligent systems: one is responsible for remembering the power setting, and the other for the gradual heating of the low heat mode lamp. Led technology does not require the replacement of fluorescent lamps, so the lamp does not require maintenance. User manual:
1. Connect the lamp to the power source.
2. After turning on the device, select the duration of lamp operation using timer: 30s, 60s or 99s. Pressing the low heat mode button will cause the device to warm up slowly. This mode is especially useful for lacquer hardening problems.
3. If you don't use the timer buttons, the ir sensor will start working when you put your hand on the lamp. If the lamp is turned on using a motion sensor, the active run time counter will be displayed. The maximum operating time without starting the timer is 99 seconds.
4. The device will turn off when you pull the button.
5. After selecting the timer mode, the time remaining until the end of the exposure will be shown on the display. Parameters:
21 Leds,
Power: 18w,
Voltage: dc 12v, 2a,
Dimensions: 215 x 133 x 75mm,
Wavelength: 365 405nm.
Lifetime of the diode: 50,000 h
The led lamp with lcd display of 18w 36 is used to harden varnishes and hybrid gels. The uniform arrangement of the diodes allows effective...show more
