All categories
Business & Offices
Electronics & Media
Fashion & Accessories
Groceries & Essentials
Health & Personal Care
Home & Living
Kids & Family
Sports & Outdoors
Search in ZoneOffer
If you've ever watched a show buffer, pixelate, or drop out entirely, you know how annoying a poor aerial setup can be. Antenna accessories—things like coaxial plates, mounts, connectors, and amplifiers—are the unsung heroes that keep a TV or radio signal clean and steady. Think of them like the plumbing for your signals: a tiny leak or wrong bend can drip away quality. Whether you're tuning into freeview, satellite, or a local FM station, having the right bits in the right place makes a dramatic difference.
Expert Electrical is a familiar name for Brits shopping for household electrical fittings, and one of the practical items they offer is the Click Single Isolated Coaxial Plate. This plate replaces a standard faceplate, giving you a neat, safe wall outlet for coaxial cable that isolates the coax housing and helps avoid interference or grounding issues. If you're tidying up a living room or setting up an AV wall, a single isolated coaxial plate keeps things looking smart and can protect your equipment from unwanted noise on the line.
Most isolated coaxial plates are simple in design but valuable in performance. You're getting a plate that secures the cable, limits stray electrical contact, and often has a screw or push-fit terminal to attach the cable easily. Use it when installing a TV wall mount, building a media cabinet, or replacing a worn-out plate in older houses. It’s the little upgrade that can save you troubleshooting hours later.
Expert Electrical usually stocks these plates at reasonable prices that won’t blow your budget—expect to pay roughly the same as you would at national retailers, often in the low single-digit price range. If you’re buying wholesale quantities or combining with other fittings, you might see even better value. Don’t forget: pairing a good coaxial plate with the right connector and cable is crucial, so budget a few extra bucks for matching parts like F-type connectors or quality RG6 cable.
Currys is a one-stop shop for most AV needs, from TVs to the small accessories that make them work. You’ll find coaxial plates, aerial connectors, and sometimes branded aerials and amplifiers. The advantage with Currys is convenience—you can often pick items up in-store and see customer reviews online before buying, which helps when you want reassurance that a product is easy to fit and performs as expected.
Richer Sounds is ideal if you're after a higher-end setup or personable advice. Their staff tend to be tech-savvy and can recommend accessories that suit a specific system, whether it’s building a living-room cinema or optimizing a rooftop satellite dish. Prices might be a touch higher than discount chains, but you often get better support and carefully chosen product ranges.
If you’re installing gear on a ladder or on the side of a house, Screwfix is built for practicality. They stock robust connectors, poles, and weatherproofing supplies suited to trade use, often in bulk quantities. Expect durable fittings, quick in-store availability, and items that stand up to frequent installation jobs.
When you need precise specs—like a particular impedance, sleeve length, or a screened connector—RS Components and Farnell are go-to suppliers. These distributors cater to electronics professionals and hobbyists who need exact part numbers, datasheets, and compatibility details. If your project requires specialist coax, low-loss cable, or unique adapters, these shops are the places to compare technical attributes side-by-side.
Online marketplaces like Amazon and eBay are treasure troves for accessories of all kinds. Want a 50 ft coaxial lead or a weatherproof F-connector? You’ll probably find multiple options and user reviews that help you pick the best seller. The downside is variability: quality and seller support can vary, so pay attention to ratings, return options, and detailed product descriptions before clicking buy.
There’s a thriving scene of specialist aerial shops and local installers across the UK that sell tailored accessories and provide fitting services. These outlets are invaluable if your location needs a directional aerial, a mast over 10 ft, or a multi-room distribution system. Specialists can recommend specific brands and lengths of cable—say a 75 ft run of low-loss cable—so the signal reaches every room without a hiss or drop.
Start with the wall interface. A coaxial plate, like the Click Single Isolated Coaxial Plate, tidies the end of your cable and ensures a solid connection to your tuner or set-top box. Pair this with quality connectors—F-type for satellite and many digital TV installs—to avoid loose contact. Cheap connectors can corrode and cause intermittent loss, so a few extra bucks on a plated connector is worth it.
Whether you’re mounting on a chimney or the side of a bungalow, pick a sturdy pole or bracket rated for outdoor use. A 10 ft pole might be fine for most urban roofs, but in fringe areas a taller mast—think 15 ft to 20 ft—can lift an aerial above local obstructions. Brackets should be galvanised to prevent rust, and use long screws and rawlplugs rated for your wall type to keep things secure in gusty weather.
Cable choice matters. Low-loss coax such as RG6 is the preferred option for runs over 50 ft because it retains signal strength better than thinner alternatives. If you’ve got multiple outlets or live several miles from the transmitter, an inline amplifier or distribution amplifier can help. Remember: amplifiers boost both signal and noise, so only use one when the incoming signal is weak but not when it’s already clipping high.
Outdoor connections must keep rain and salt spray out. Use weatherproof boots, silicone sealant, and UV-resistant tape on joints. Grounding is not glamorous but is essential: a properly earthed aerial reduces lightning risk and cuts down on interference. Use a dedicated earth block and short heavy-gauge grounding wire to a house earth rod or mains earth point to stay safe.
One quick way to ruin a link is to mismatch connectors or impedance. Most UK TV and satellite systems use 75 ohm coaxial cable; keep things consistent from aerial to plate. If you mix 50 ohm and 75 ohm components, expect noticeable loss. Always check the connector type—F-type for satellite, Belling-Lee for many terrestrial aerials—and buy the adapter only if absolutely necessary.
Measure your cable run in feet before buying. A 10 ft cable is fine for close hookups, but living room setups often need 25 ft or more to hide behind furniture. For runs over 50 ft, upgrade to lower-loss cable and avoid excessive bends; sharp kinks are signal killers. Also consider roofline obstructions: a transmitter 20 miles away may need a more directional aerial than one 3 miles from a mast.
Decide early if you want a quick budget fix or a setup that lasts. Cheap leads and connectors can be fine for short-term needs, but quality fittings reduce maintenance and replacement costs over time. If you’re putting in a permanent aerial or planning a multi-room system, lean toward better materials—stainless or galvanised fixings, proper low-loss cable, and a solid plate from a reputable supplier.
When fitting a plate or swapping a connector, turn off the TV and take a photo of the old wiring so you can reassemble correctly. Keep cable runs tidy with clips spaced about 2 ft to 3 ft apart to prevent sagging and strain. Use a spirit level when mounting plates or brackets so cables don’t twist at odd angles, which can wear them prematurely. And always use the right tools: a decent coax stripper and a torque wrench for connectors make the job faster and neater.
If your aerial needs to be fitted on a high roof, chimney, or in awkward locations, don’t risk it—call a qualified installer. Also seek professional help for multi-point distribution systems or when grounding and lightning protection become critical. A pro will measure signal strength at different spots and recommend the exact amplifier or dish alignment needed, saving you time and potential repeat visits up a ladder.
Accessories are where smart shoppers save. Compare prices across retailers and check marketplaces for bulk deals—sometimes you can buy three connectors for the price of two. Look for items with short warranty periods that are still backed by reputable brands; a simple two-year cover on a plate or amplifier can be a good indicator of build quality. Also, consider buying a kit if you need several parts at once; kits often undercut buying pieces separately and reduce compatibility headaches.
Technology evolves, but a well-thought-out installation lasts. Run a couple of spare conduits or install slightly longer cable runs to allow future re-routing without pulling walls apart. Choose accessories and plates with modular designs so you can swap connectors if standards shift. If you plan to add streaming or networked set-top boxes, allow for extra outlets and tidy cable management so your living room doesn’t turn into a spaghetti junction years down the road.
Choosing the right antenna accessories in the UK doesn’t have to be a headache. Start with the basics—a solid coaxial plate like the Click Single Isolated Coaxial Plate from a trusted supplier such as Expert Electrical—then pick good-quality cable, connectors, and weatherproof mounting hardware. Whether you buy from general retailers like Currys, trade-focused shops like Screwfix, or specialist suppliers, match parts to your signal needs and installation environment. With a few thoughtful choices and a bit of care during installation, you’ll have a reliable, neat setup that keeps your shows and stations coming in clean and clear.
| Antenna Accessories - Other | Price | |
|---|---|---|
| Deta Vimark Curve Tv Fm Dab Diplexor Outlet | £ 6,79 |
