All categories
Business & Offices
Electronics & Media
Fashion & Accessories
Groceries & Essentials
Health & Personal Care
Home & Living
Kids & Family
Sports & Outdoors
Search in ZoneOffer
Ever tried to send the same HDMI signal to a TV and a projector at the same time and ended up juggling cables like a circus act? Splitters and switches solve that chaos. They let you expand, route, and control audio and video signals without rewiring your entire system. Whether you’re running LED strips behind a screen, feeding multiple speakers from a single amp, or switching between consoles and streaming boxes, the right splitter or switch makes your life simpler and your setup cleaner.
HDMI splitters duplicate one HDMI input to multiple outputs so a single source can drive two or more displays. An HDMI switch does the opposite: it lets several sources share a single screen. Look for models that support the resolution you need, and beware of cheap units that cause jitter or dropouts over long cable runs—use quality HDMI cables and keep lengths under about 25 feet when possible for reliable performance.
Audio splitters let you feed one source to multiple speakers or zones. For more advanced setups, multi-channel amplifiers (like the Ovia 4 Channel Performance Amplifier) let you manage separate zones with independent volume controls. These are perfect when you want different music in the living room and kitchen without extra streaming devices.
If you’re doing bias lighting or ambient LED behind a TV, LED splitters let one controller power multiple strips. Products like the “Splitter Cable For Led Strip Bluetooth Kit Aurora Aone” make it easy to share a controller across two runs. Keep an eye on power draw—splitters don’t increase the controller’s power, so if you extend length you may need a beefier power supply.
Channel splitters such as the “Integral 12v Channel Splitter 6 Ports 2 Pin Clip” are common in lighting systems. They distribute power from a single driver to multiple LED strip runs. Integral’s range includes 12v and 24v options, and versions rated at 5A which are suitable for many domestic installations—just calculate your total wattage to ensure the splitter and PSU can handle the load.
The Ovia 4 Channel Performance Amplifier is a go-to when you want to drive multiple speaker pairs or create distinct audio zones. It delivers clean power and separates channels for better control. If you’re upgrading from a stereo amp, this gives you flexibility to add more speakers without buying separate amps for each zone.
This splitter cable pairs nicely with Bluetooth LED controllers when you need to power two strip runs from one unit. It’s a practical option for behind-TV setups where you want symmetry on both sides of the screen. Keep in mind the combined length; if you exceed roughly 16 feet total, voltage drop may dim the far strip unless you supply additional power.
The Integral 12v 6-port splitter in black is compact and simple to use—clip it into place and extend your LED runs. It’s ideal for short to medium runs where a tidy, hidden junction is required. With each port supporting a reasonable current, you can distribute power across multiple short strips safely.
A 24v version of the splitter lets you run longer lengths of strip with lower current per foot, which reduces voltage drop for long runs. The white finish blends well with lighter ceilings if you’re working with hidden coves or under-shelf lighting. As always, match your splitter’s voltage rating to the LED strip and power supply.
This higher-current 12v splitter is built for heavier loads—think more LEDs per run or extra accessories like in-line amplifiers. At a 5 amp rating, it can handle most domestic lighting setups, but you should still calculate wattage to avoid overloading a single port.
When your system runs at 24v and you need a robust distribution point, this Integral 24v 5A splitter gives peace of mind. It’s commonly used in longer LED installations where reduced current and improved efficiency are important. Installation is straightforward—clip, connect, and secure—but always ensure connectors are snug to prevent flicker.
Expert Electrical often carries many of the same Integral splitters and the Ovia amplifier, which is great if you prefer to stick with a specialist electrical supplier. They may also offer alternate packaging or bulk options for installers who buy multiple units. If you’re doing several rooms, checking a supplier that supports trade purchases can save time and money.
Expert Electrical tends to balance quality and price, offering both consumer-friendly items and professional-grade gear. That means whether you’re a weekend DIYer or fitting out a flat for short-term let, you’ll find the parts needed—splitters, clips, connectors, and suitable power supplies—all in one place. They also stock various cable lengths so you won’t be forced into long custom runs.
Compared to general electronics retailers, a specialist like Expert Electrical might stock more robust connectors and higher-current splitters. If durability matters to you (for example in commercial or exposed installations), shopping specialist networks can be a smarter choice than general marketplaces.
Always start with signal compatibility: HDMI for high-definition video and audio, RCA or optical for older audio setups, and DC-powered channel splitters for LED systems. Using the wrong type is like trying to fit a square peg in a round hole—signals will fail or you’ll get noisy output.
For LED and amplifier systems, check the voltage and amp rating. The Integral splitters come in 12v and 24v variants—choose the one that matches your strip and PSU. Add up the wattage of all connected devices and keep the total below the splitter’s rating; if you approach the limit, go one size up to avoid overheating.
Think about whether you’ll expand. A 6-port splitter may be perfect now, but if you plan to add more strips or speakers, consider a splitter with extra ports or a modular system where you can daisy-chain additional splitters. It’s easier to invest slightly more up front than reorganise later.
Cable matters. Cheap, long HDMI runs can ruin a signal—use well-shielded cables and keep runs under about 25 feet for best reliability. For LED strips, use thicker gauge wire for longer runs and plan power injection points every 16–20 feet or so to prevent dimming.
Turn off power when connecting splitters to avoid sparks. Use proper wire connectors and avoid twisting bare wires—use insulated clips or terminal blocks for a secure connection. Label each run during installation so troubleshooting later is painless.
If you see intermittent audio dropouts or a snowy video signal, suspect cable length and interference. Route audio and power cables separately from mains wiring, use ferrite cores if needed, and keep HDMI cable runs as short as practical. For networked or IP-based video, ensure your switch or router can handle the streaming bandwidth.
Splitters distribute signals, but they don’t magically supply more power. If you’re splitting a controller’s output to multiple strips, confirm the controller and power supply capacity. For runs over around 16 feet, plan a power injection point to maintain brightness. If you’re unsure, err on the side of a larger PSU—it’s cheaper than replacing damaged strips.
Currys is strong for consumer electronics and a good place to find HDMI switches and multi-room audio devices. They usually stock popular brands and offer convenient in-store pickup.
RS Components caters to professionals and hobbyists with a wide range of splitters, terminals, and higher-spec connectors—perfect if you need industrial-grade parts or specific wiring accessories.
Screwfix is handy for electricians and DIYers who want quick access to clips, junction boxes, and power supplies. Their network of stores makes it easy to grab emergency parts for a job mid-project.
Online marketplaces have the widest selection and competitive pricing. You’ll find everything from budget splitters to premium HDMI matrix switches. Read reviews carefully—quality varies and seller reliability matters.
Specialist AV stores and the remaining electronics niche retailers offer curated selections and knowledgeable staff. If you want hands-on advice or compatibility checks, these shops can be invaluable.
Prices can vary widely. Basic 1-to-2 HDMI splitters are inexpensive, while multi-input HDMI switches and matrix units command a premium. LED splitters and channel splitters from Integral are affordable and pack practicality; the key is balancing build quality against price. For critical home theatre or commercial installs, spend a little more on well-built units and reputable brands to avoid downtime and signal issues. A good rule: if an item is significantly cheaper than similar models, check reviews and return options before buying.
Most splitters and switches have modest power draws, but amplifiers and multi-zone systems can increase consumption. Choose efficient amplifiers and switch off unused zones when possible. Also, ensure ventilation around amps and controllers to avoid overheating and use properly rated fuses and circuit protection when modifying electrical systems.
Keep connectors clean and dry, avoid flexing cables at joints, and secure splitters away from high-traffic areas. If a port becomes intermittent, inspect the connector and cable first—often the cable is the culprit. For long-term reliability, use components rated slightly above your needs so they don’t run at their limits.
Before clicking “buy,” run through a short checklist: match signal types, confirm voltage and current for LED systems, pick the right number of ports, check cable lengths and quality, and verify compatibility with existing devices. If you’re buying from a specialist like Downlights or Expert Electrical, you’ll often get more detailed product information and the right accessories in one go.
Audio and video splitters and switches are the unsung heroes of clean, expandable AV setups. Whether you pick an Ovia amplifier for multi-zone audio, an Aurora Aone LED splitter for ambient lighting, or Integral channel splitters to tidy up LED runs, the right choice reduces frustration and improves performance. Shop around, check specifications, and plan for future expansion—your next system upgrade will thank you.
Conclusion: Investing a little time in choosing the right splitter or switch pays off in reliability and flexibility. Prioritise compatibility, power handling, and cable quality, and you’ll end up with a clean, dependable system that grows with your needs.
| Audio & Video Splitters & Switches | Price | |
|---|---|---|
| Integral 12v Channel Splitter 6 Ports 2 Pin Clip Black | £ 1,80 | |
| 12v Channel Splitter 6 Ports 2 Pin Clip Black Integral Led | £ 1,80 | |
| Integral 24v Channel Splitter 6 Ports 2 Pin Clip White | £ 2,35 | |
| 24v Channel Splitter 6 Ports 2 Pin Clip White Integral Led | £ 2,35 |
