All categories
Business & Offices
Electronics & Media
Fashion & Accessories
Groceries & Essentials
Health & Personal Care
Home & Living
Kids & Family
Sports & Outdoors
Search in ZoneOffer
Loading...
Great builds don’t fall apart because the fasteners hold them together. It sounds obvious, but it’s easy to overlook the humble clamp, nut, rod, or screw when you’re chasing deadlines or juggling specs. The truth? Your fasteners are the backbone of the job. Whether you’re hanging services from steel, childproofing a kitchen, or running trunking across a busy workspace, the right component saves time, boosts safety, and stretches your budget further. That’s why comparing trusted brands and pack sizes across a price comparison site matters—it keeps quality high while keeping costs in check.
If you’re scanning for value, you’ll find standout options across safety, electrical containment, and structural fixings. Think magnetic drawer locks for homes, beam clamps for steelwork, purlin clips for rods, self-drilling screws for rapid metal fixing, and trunking accessories for tidy cable runs. Names like Walraven Britclips, Unicrimp, Unitrunk, Orbix, and Falcon bring a solid reputation to the table, while packs of 25, 50, 100, or 200 keep projects supplied without constant reorders. Ready to drill into the details? Let’s break down where each product shines and how to choose the right one.
Childproofing is one of those small jobs with a huge payoff, and a magnetic drawer lock makes it painless. The Babyjem Magnetic Drawer Lock keeps curious hands out of drawers and cabinets without leaving visible latches or bulky hardware on display. It’s discreet, easy to use, and ideal for kitchens, bathrooms, and utility rooms. Because it’s non-invasive on the outside, your space stays clean-looking—no clunky plastic guards that shout “temporary fix.” If you rent or you care about aesthetics, this is a smart pick.
Fitting is simple: align the catch and lock body, stick or screw into place, and you’re set. Keep a consistent reveal so the magnet engages every time, and stash the key high up where little ones can’t reach. Got thicker doors or face frames? Test the lock through the panel before final fixing; a stronger magnet key can help if you’ve got chunky fronts. The payoff is instant peace of mind—like flipping a safety switch on your furniture.
When you’re suspending services from purlins, the right hanger clip turns a tricky overhead fix into a quick, clean operation. Walraven Britclips has a rock-solid rep for steelwork accessories, and their purlin clip for threaded rod is designed for consistent grip and predictable installation. If you’re hanging lights, duct, or tray from roofing steel, these clips cut ladder time and keep your lines straight—no mess, no stress, and no guesswork.
Use purlin clips when you want a tool-light solution with repeatable spacing and no drilling into the steel member. They’re especially useful when a standard hanger or through-bolt would slow you down. Choose a clip that matches your rod diameter—common setups use rod around 3/8 inch—and lock it off with a nut and washer combo for extra security. The efficiency gains on repetitive runs can be huge.
Light-gauge lock nuts are the unsung heroes that keep your assemblies tight even when they’re rattled by vibration. Unicrimp’s bright zinc-plated option pairs well with indoor metalwork, threaded rod, and channel systems. The coating resists everyday corrosion and looks clean inside cabinets, risers, and plant rooms. For commercial or residential projects where longevity matters, tossing these in with your rod and bracket order is a no-brainer.
Bright zinc plating is a smart fit for indoor or dry locations where you want tidy aesthetics and reliable rust resistance. Galvanized coatings are the heavy-duty choice for harsher environments—think damp spaces, garages, or outdoor areas—where the extra layer pays off over time. Not sure which to pick? Ask where the hardware will live and how it will be used; the environment decides the finish.
Need a strong connection into masonry? Projecting anchors deliver secure holding power for fixtures like brackets, frames, and rails. Unicrimp’s anchors are built for dependable expansion, giving you the kind of bite into brick or concrete you can trust. Use them for heavyweight fixtures or wherever a regular plug and screw won’t cut it. With the right drill bit and proper hole depth, installation is quick and decisive.
Anchors love solid bases: concrete, brick, or dense block. Avoid crumbly substrates or thin hollow walls without appropriate sleeves. Keep edge distances in mind, and never overtighten—cracking the base material is a fast way to lose capacity. When in doubt, test a spare hole and confirm the fixture isn’t overloading the point. A well-planned anchor layout spreads forces and keeps your installation safe under live loads.
Beam clamps are the workhorses of steel-frame fixings. Walraven Britclips beam clamps grip flanges cleanly, creating strong attachment points for rods, straps, and hangers. They’re a go-to on jobs where welding is off the table and drilling is a slow, noisy headache. With the right clamp, you get a repeatable setup that holds straight under load and resists slippage even when the site shakes or vibrates.
Match the clamp to the flange thickness so the jaws seat fully. For thread size, 3/8 inch is common on service runs, while larger diameters suit heavier scenarios. Combine with locking washers or double-nut where vibration is likely. If you’re mixing manufacturers, check the recommended torque to avoid overstressing the clamp or deforming the flange.
Self-drilling screws are like having a drill bit built into your fastener. Orbix general purpose self-drillers cut through light-gauge metal and fix in one smooth step. If you’ve ever juggled a driver and pilot drill on a ladder, you know how much time a good self-driller saves. With a PZ2 drive and a sharp point, these screws bite quickly, hold tight, and reduce cam-out—ideal for fixing brackets, light framing, and accessories to steel.
They shine on repetitive tasks: fixing trunking lids, strut accessories, or cable tray covers where every second counts. Use a steady hand, keep the driver square, and let the point do the work—forcing it only burns tips and shortens life. If you’re joining multiple layers of sheet, step up to a heavier-duty option and check that your total stack is within the screw’s drilling capacity.
Clean cable management keeps projects looking professional and makes maintenance a breeze. Falcon’s trunking spring clip saddle holds trunking or cabling snugly without marring the finish. The spring action eases installation, and the simple profile maintains a low visual impact. Use these in corridors, plant spaces, and residential risers where you want secure, consistent cable support without bulky brackets.
Pick a saddle that matches the trunking’s external width and profile. For typical mid-width runs—around 6 inches across—choose a saddle designed to embrace the body without crushing it. When in doubt, test-fit a sample on a short length; the right saddle clicks into place and holds firm without forcing. Consistency here equals faster runs and fewer callbacks.
If you’ve got dynamic loads or long spans, a beam clamp with a locking unit provides added insurance against movement. Walraven’s combination design balances installation speed with a secure locking feature, making it excellent for lines that see vibration or thermal expansion. Think mechanical rooms, production floors, or anywhere service lines can rattle and shift.
A proper locking unit resists loosening under cyclic loads. Pair it with the correct nut strategy—locking nuts or double-nut—and torque to spec. If the steel flange is painted or coated, verify the clamp bites metal-to-metal where required; remove paint only in the contact zone to preserve corrosion protection elsewhere.
Side-mounted conduit clips are lifesavers when space is tight or access from above is blocked. Walraven’s side-mounted locking conduit clip grips round conduit firmly and adds a locking action so the run stays put. Perfect for mounting to beams, walls, or the sides of trunking where a traditional top-mounted clip won’t fit. The locking feature helps keep bends aligned and junctions tidy.
Measure the outer diameter of the conduit in inches and choose a clip that fits snugly without forcing. For typical electrical conduit sizes, aim for a clip that closes securely while still allowing you to adjust alignment before the final lock. If your conduit has a thicker coating, size up slightly and test one piece before committing to the full run.
For long, straight cable runs, a galvanized steel trunking lid from a known brand like Unitrunk delivers durability and a clean look. Expect long lengths—around 10 feet—and mid-width options—around 6 inches—to cover the most common scenarios in commercial and light-industrial spaces. A good lid seats flush, resists warping, and screws down quickly, speeding up the overall install.
When trimming lids, use a fine-tooth saw and support the steel close to the cut to avoid chatter. Deburr edges immediately to protect hands and cables, then dry-fit before final fix. Pre-drill screw points along the run to keep spacing even, and start fasteners in the center to discourage bowing. Treat the lid like a ruler: straight, steady, and square.
Threaded rod is the backbone of suspended systems. With common lengths around 10 feet, you can span across bays and cut down to size on site. Pair Unitrunk rod with compatible nuts, washers, and couplers to build strong, adjustable hangers for tray, duct, and pipe. The result is a suspension system that’s simple to install and easy to tweak as other trades move through.
Use a rod cutter or a clean, square chop with a hacksaw, then dress the threads with a die so nuts spin freely. Couplers extend your reach or bridge awkward gaps; just keep them centered between supports and lock both sides. For overhead work, mark your cut lines on the ground—saving your shoulders and keeping the job precise.
Galvanized lock nuts might look basic, but they’re a big deal in the long-term durability game. When you’re outdoors, in damp basements, or near plant that sweats, the thicker galvanized finish helps fight rust and protects threads. Combined with washers and the correct torque, they keep your assembly intact season after season. It’s the small upgrade that prevents big headaches.
Use them anywhere moisture is a factor: garages, exterior runs, rooftops, or plant rooms with temperature swings. If you’re mixing metals, avoid combinations that invite galvanic corrosion; match finish to finish when you can. And if the fastener will be touched or adjusted later, galvanized parts offer a kinder surface that stands up better to repeated handling.
Comparing fasteners is more than just checking the ticket price. Look at the pack size, the finish, the intended substrate, and whether the brand is known for consistent quality. A reputable comparison site helps you filter by brand, coating, and pack count so you’re not paying for fillers you don’t need. Balance price with reliability—especially for fixings you’ll never see again after the ceiling closes up.
Pack counts affect cost per piece, and finishes affect lifespan. If a clamp, anchor, or screw publishes load data, check the fine print: the substrate, the installation method, and the safety factors. If there’s no published data, lean on brand reputation and use the part within standard practice. Always consider the environment—dry, damp, coastal, hot—and choose coatings that match.
Start with the basics: what are you fixing, what are you fixing into, and what’s the environment like? From there, select the fastener family—clamp, anchor, screw, rod, or clip—and narrow by size and finish. Typical rod and clamp setups hover around 3/8 inch for everyday service runs, while trunking lids often land near 6 inches in width. Indoors, zinc-plated makes sense; for tougher conditions, galvanized steps in. When mixing brands, confirm thread compatibility and clamp fit before bulk buying.
Confirm your diameters in inches, double-check pack quantities, and pick a finish that suits the site conditions. Verify that clamps match flange thickness, anchors match the base material, and screws can drill the combined stack. If you’re on a live site, order a small test batch first—nothing beats a hands-on mock-up to reveal surprises.
The best fixings are the ones you never have to think about again. That only happens when you follow installation guidance and respect the limits of each component. Check for brand certifications, keep an eye on torque recommendations, and document what you used where. Safety isn’t a bolt-on; it’s built in from the first fastener you choose.
For commercial work, traceability matters. Keep invoices, lot numbers, and spec sheets with your handover pack. Where fire performance is relevant—think escape routes and critical services—choose fixings designed for the task and install them as instructed. The right paperwork and the right parts keep projects compliant and people safe.
From discreet magnetic locks at home to heavy-duty clamps and anchors on site, great fasteners make every project simpler, safer, and more efficient. Brands like Walraven Britclips, Unicrimp, Unitrunk, Orbix, and Falcon offer proven solutions across the board, and smart comparing helps you lock in value without losing quality. Pick the right size in inches, match the finish to the environment, and don’t skimp on the small parts—because the strongest builds are only as good as the fasteners that hold them together.
| £ 56,21 |
| Mondo Cable Ties - 10 Pack | £ 56,21 |
