All categories
Business & Offices
Electronics & Media
Fashion & Accessories
Groceries & Essentials
Health & Personal Care
Home & Living
Kids & Family
Sports & Outdoors
Search in ZoneOffer
Ever finished a project and felt something was missing? That last little detail that makes it look complete and stay protected? That’s where electrical plug caps and end caps step in. These compact accessories seal, tidy, and protect your electrical fittings—especially LED channel profiles and flexible neon lighting—so your setup looks polished and performs reliably for the long haul.
Think of them as the finishing “capstone” for your wiring and lighting profiles. Whether you’re capping an exposed end for a neat finish or giving wire pass-through a clean, sealed entry point, the right cap prevents dust, moisture, and accidental knocks from ruining your hard work. They’re small, sure, but they’re big on safety, longevity, and style.
If you’re working with Integral LED channels or side-bend neon, you’ll see lots of specific model numbers on compatible end caps. Don’t worry—this guide breaks those down, compares popular options, and shows you how to pick the right one for your project without second-guessing.
LED profile end caps are designed to finish the ends of aluminum or plastic channels that hold your LED strips or neon. That neat faceplate you see at the end of an under-cabinet strip or stair tread lighting? That’s usually an end cap. Some models are solid (no holes), while others include a pass-through for wiring or a dedicated cable entry point. The best fit depends on whether you’re routing cables behind the profile, feeding a wire out the end, or sealing the system for weather resistance.
From the Integral line, you’ll find targeted caps matched to specific channels such as ILPFS040–ILPFS043, ILPFS102–ILPFS103, ILPFS188–ILPFS189, and ILPFO135–ILPFO136. Using the correct match ensures a snug, lasting fit.
Need a completely sealed finish at the end of your profile? The Integral profile end cap without hole for ILPFS188 and ILPFS189 does exactly that. It’s the go-to choice when your wiring is concealed and you don’t need cable access from the end. The result: a clean, flush aesthetic with fewer ingress points for dust or splashes.
This type of cap shines in kitchens, living rooms, display cabinets, and any space where a tidy edge is the goal. It’s also a smart pick when you’re aiming to maintain higher resistance to the elements, especially in sheltered outdoor areas where the profile is otherwise sealed.
When your cable needs to exit through the end of the channel, a “with hole” cap is your friend. Designed for profiles ILPFS040 through ILPFS043, this option keeps your wire neatly centered and supported rather than dangling. You get a professional, straight-through look without forcing the wire around corners or sharp edges.
It’s ideal for under-shelf runs or ceiling coves where the power feed comes from one side. Pair it with a grommet or sealant when you want an extra layer of protection against dust or mild moisture.
Prefer a flush, sealed end on those same channels? Choose the “without hole” version. It matches ILPFS040–ILPFS043 as precisely as the drilled version but forgoes the pass-through opening. If your cable is hidden at the back or routed elsewhere, this gives you the cleanest finish possible.
It’s a small choice that makes a big visual difference—especially on open shelves and feature lighting where the ends are visible at eye level.
Working with ILPFS102 or ILPFS103 channels and don’t need a cable coming out the end? This dedicated “no cable entry” cap delivers a tight seal and a minimalist look. It’s great for continuous runs where the wire feeds in from behind the profile or a junction that’s hidden from view.
Because you’re sealing the end entirely, you help protect your LED channel from dust buildup while maintaining a sleek, professional finish.
When the wire needs to exit the profile cleanly, the “with cable entry” endcap for ILPFS102 and ILPFS103 keeps things organized. Rather than improvising with drill bits or makeshift holes, this purpose-built cap supports the cable in the right spot and reduces strain on the connection—especially helpful for longer runs or frequent on/off cycles.
It’s a simple upgrade that increases reliability. Add a dab of neutral-cure sealant around the entry if the environment is dusty or occasionally damp.
Got ILPFO135 or ILPFO136 profiles? This variant offers that same clean cable exit but tailored to your specific channel design. Matching the end cap to the exact profile series prevents wobbles, gaps, or misaligned edges that can compromise the finish.
If you’ve invested in neat channels and smooth diffusers, don’t let the end treatment let you down—this is where a model-specific cap earns its keep.
Flexible neon is becoming a design staple, especially side-bend types that twist around signage, coves, and curves. To finish and protect these runs, end caps are essential. Integral offers two distinct material styles for 4x10 side-bend neon: silicone and metal. Which should you pick? It depends on your priorities.
Silicone end caps are all about flexibility and sealing, while metal end caps emphasize durability and a crisp, rigid finish. If your neon ends are exposed to touches, bumps, or occasional outdoor splash, the material you choose can make a noticeable difference in lifespan and looks.
Silicone caps are soft, forgiving, and supportive. They cushion the neon end while helping to keep dust and splashes at bay. Because silicone conforms slightly, it can create a snug interface around the neon body, and it’s easy to work with if you’re cutting, trimming, or adjusting on site.
They’re perfect for accent lighting, indoor features, and curved installations where a little give is an advantage. If you’ve got a winding run with delicate turns, silicone is typically the more installer-friendly option.
Metal caps bring sturdiness and a premium feel. They provide a hard edge that resists knocks, making them a strong choice for commercial settings or busy residential areas like hallways and stair edges. If you prefer a crisp mechanical finish with strong impact resistance, metal is hard to beat.
They may require slightly more care when aligning with the neon body, but the reward is a durable end that looks sharp and holds its shape over time.
Confused by the options? Here’s a quick way to decide:
If your cable doesn’t need to exit the end, choose an end cap without a hole. This gives the cleanest look and the best passive protection against dust and splashes.
If your cable exits through the end, choose a “with hole” cap. It provides a neat pass-through that reduces strain and keeps the wire centered.
If your profile is designed for a shaped cable path, select a dedicated “with cable entry” end cap designed for that profile series (for example, ILPFS102–ILPFS103 or ILPFO135–ILPFO136). This ensures a snug fit and minimizes the risk of chafing.
Remember, the best match is the one that fits your specific profile model. Mixing series may look close, but a fraction off can lead to visible gaps or loose edges.
Good news—end caps are simple to install. Still, a few pro tips can elevate the result from “fine” to “flawless.”
Dry-fit first. Before committing, slide the cap in place to confirm alignment with your diffuser and channel. If you’re using a “with hole” or “with cable entry” style, check that the cable sits naturally and isn’t forced at an angle.
Mind the cut. If you trimmed your profile, ensure the cut is straight and free of burrs. A smooth end face gives the cap a better seat and helps the diffuser align.
Add a seal if needed. In dusty or splash-prone spots, a thin bead of neutral-cure sealant can increase resistance to ingress. Don’t overdo it—excess can ooze out and spoil the look.
Support the wire. When using pass-through caps, provide strain relief behind the profile so tugging the cable doesn’t stress your connectors.
Test the lighting first. It’s easier to swap a cap before you finalize the layout than afterward. Power the strip or neon, verify brightness and color, then finish the ends.
End caps help protect the sensitive guts of your lighting install—LED tape connections, solder points, and conductors. Sealed ends reduce dust build-up and keep accidental splashes from reaching contacts. If your project is outdoors or near sinks and baths, aim for a properly sealed setup across the whole system: end caps, gasketed channels (if applicable), and suitable sealant.
Also consider material choice. Silicone can provide a flexible barrier for neon runs that expand or shift slightly, while metal caps provide a tougher boundary where knocks are likely. In all cases, follow the manufacturer’s guidelines for the profile series you’re using to maintain the intended level of protection.
Matching the right end cap to your LED channel or neon system is crucial. In the Integral ecosystem, “ILPFS” and “ILPFO” denote different profile series. The numbers that follow (like 040–043, 102–103, 135–136, 188–189) point to specific profile shapes and sizes. That’s why you’ll see two versions of the same cap style—one with a hole, one without—tied to the same set of numbers.
When you see “Profile End Cap With Hole for ILPFS040, ILPFS041, ILPFS042, ILPFS043,” it means that cap is designed to fit those four profiles precisely. The same applies to “without hole” or “with cable entry.” If you’re unsure which profile you have, check the datasheet or label from your original channel purchase before ordering end caps.
Notice how the side-bend neon end caps come in sets of five? Multipacks are practical because you’ll often need at least two caps per run—and having spares is a lifesaver if one gets damaged during installation. They also ensure each cap is identical, which keeps your project visually consistent from end to end.
Before you commit, compare prices across multiple retailers to gauge the true value of single units versus sets. On a comparison platform, you can quickly scan offers, see different bundles, and choose the best balance of cost and quality for your project.
Kitchen under-cabinet lighting: Profile end caps without holes give you a seamless finish that blends into cabinetry. If your power feed comes in at one end, a version with a hole provides a tidy exit.
Stair tread or hallway accents: Metal end caps for side-bend neon resist bumps and scuffs, delivering a crisp edge in high-traffic areas.
Retail and hospitality displays: Silicone end caps for neon provide a forgiving fit on curved or custom signage while enhancing protection against dust.
Outdoor soffits or garden features (protected areas): Sealed end caps help improve durability against the elements when used with suitable channels and sealants.
Mismatched model numbers: Using a cap made for a different profile series can lead to gaps or loose fits. Always verify your profile code.
Forcing cable exits: If your wire doesn’t line up with a “with hole” cap, don’t force it. Choose the correct cap style (with cable entry) or re-route the cable gently.
Skipping the test fit: A quick dry run avoids alignment issues and detects any rough cuts that could prevent a tight seat.
Over-sealing: Too much sealant looks messy and can even interfere with heat dissipation or maintenance. Use a light, even bead only where needed.
Silicone: Flexible, forgiving, and good for a snug seal on neon. Ideal for curved runs and areas with minor movement or temperature swings.
Metal: Rigid, durable, and impact-resistant. Delivers a premium, crisp end—great for commercial or high-traffic installations.
Plastic: Common for standard LED channels, balancing cost and performance. Pair with the correct profile series for the best appearance and fit.
Think about the end cap like a picture frame’s corner—small but always in view. If your install is at eye level or under glass, a “without hole” cap can create that uninterrupted, gallery-like finish. If you need a cable exit, choose a cap where the pass-through sits squarely and consider a small grommet for an even sleeker look.
For neon, decide whether you want a soft, blended edge (silicone) or a definite, defined boundary (metal). Both can look premium—the choice comes down to the mood you want to set.
Once installed, end caps require little attention. A soft, dry cloth is usually enough to keep dust at bay. If you’re in a greasy or steamy environment (hello, kitchens), a light wipe with a mild, electronics-safe cleaner can keep the ends presentable without harming seals.
If you ever need to access wiring, the beauty of proper end caps is that they can be removed without damaging the profile, provided you didn’t overload the joint with adhesive. Gentle, steady pressure does the trick.
Not all caps are created equal—but you don’t have to break the bank. Here’s a simple budget strategy: spend a little more on caps that are in direct view or in high-traffic areas, and choose standard plastic caps in hidden or protected runs.
Look out for multipacks (like the 5-set options for side-bend neon). They often reduce per-cap cost and give you spares. Use a reliable comparison platform to view the latest Electrical Plug Caps price list across retailers so you can pick the best deal without sacrificing fit or finish.
Mounting clips and brackets: Keep profiles straight and sturdy, reducing stress on end caps.
Diffusers and lenses: A clear or frosted diffuser can transform the look while protecting the LED strip, aligning neatly with your end caps.
Cable glands and grommets: Perfect for pass-through caps to protect wiring and improve the seal.
Adhesive tapes and sealants: Choose installer-grade options for secure, clean finishes and light weather resistance where needed.
Wire management: Simple clips or channels keep cables tidy and reduce tugging at the end cap exit points.
Measure and plan your runs, confirming the exact profile series. Decide where cables will enter and exit—and whether you need a cap with a hole or cable entry.
Choose materials (silicone, metal, plastic) based on traffic, exposure, and the look you want. Consider multipacks if you have multiple runs or might make mistakes during trimming.
Dry-fit everything: profile, diffuser, cap, and cable. Make adjustments before sealing or final mounting.
Install carefully and finish with subtle sealant only if your environment calls for it. Clean up and test—then enjoy the glow.
At first glance, electrical plug caps and LED profile end caps might seem minor. But they’re the final touch that protects your wiring, elevates the look, and boosts durability. From Integral’s model-specific options—like caps for ILPFS040–ILPFS043, ILPFS102–ILPFS103, ILPFS188–ILPFS189, and ILPFO135–ILPFO136—to specialized silicone and metal sets for 4x10 side-bend neon, the right choice depends on cable routing, exposure, and the finish you want.
Match your cap to your profile series, decide on hole vs no hole vs cable entry, and pick a material that suits your space. Compare prices across retailers to get strong value, and don’t overlook multipacks for convenience and consistency. Do that, and your project won’t just work well—it’ll look professionally finished from end to end.
Electrical plug caps and LED profile end caps do more than just “cap” a project—they protect connections, refine aesthetics, and add years to your setup. Whether you need a sealed finish for ILPFS188–ILPFS189, a clean pass-through for ILPFS040–ILPFS043, a cable-ready exit for ILPFS102–ILPFS103 or ILPFO135–ILPFO136, or specialized silicone or metal end caps for 4x10 side-bend neon, there’s a purpose-built solution waiting for you. Plan your cable paths, pick the right cap style, and compare across sellers to secure the best deal. With that done, the rest is simple: click in the cap, power up the lights, and enjoy a polished result that looks as good as it performs.
| Electrical Plug Caps | Price | |
|---|---|---|
| Profile End Cap Without Hole For Ilpfc044 Ilpfc045 Ilpfc046 Ilpfc047 Integral Led | £ 0,28 | |
| Integral Profile End Cap With Cable Entry For Ilpfs102 Ilpfs103 | £ 0,67 | |
| 5 Sets Of Silicone End Cap Outlet From Left Or Right Integral Led | £ 3,83 | |
| Integral 5 Sets Of Silicone End Cap Outlet From Left Or Right | £ 3,83 |
