All categories
Business & Offices
Electronics & Media
Fashion & Accessories
Groceries & Essentials
Health & Personal Care
Home & Living
Kids & Family
Sports & Outdoors
Search in ZoneOffer
Ever felt your drill bog down, your driver bit cam-out, or your hole saw screech and scorch? It’s not always the tool’s fault. The real magic happens when you match the right accessory to the job. In this guide, we’ll walk through standout options like cobalt hole saws, impact-rated driver bits, long augers, SDS wood bits, spade bits, earth‑rod solutions, and the small but mighty helpers—bit holders, bit clips, and extension shafts. You’ll also pick up practical tips on speed, feed, safety, and selection, plus how to compare prices and specs across multiple retailers through a comparison site such as ZoneOffer so you buy smarter, not just faster.
You’ll discover where each accessory shines, what features matter (coatings, tooth geometry, shank styles), and how to dial in speeds and torque for cleaner cuts, longer life, and fewer headaches. If you build decks, wire homes, hang cabinets, run earth rods, or simply love weekend projects, you’ll leave with a clearer, more confident buying checklist—and you’ll know exactly which pro-grade picks deserve a spot in your kit.
When you need a big opening—think venting, pipe runs, or cable pass‑throughs—a 5‑inch hole saw with cobalt bi‑metal teeth is a workhorse. The CK Pro‑Cobalt vari‑pitch design doesn’t just nibble; it chews smoothly through tough materials. Vari‑pitch teeth help disrupt vibration and chatter, which means cleaner holes, less heat, and fewer chances of binding.
Vari‑pitch teeth stagger the cutting load so your drill isn’t fighting a rhythmic “hammer” effect. Cobalt alloy adds heat resistance, which is a lifesaver on harder steels and prolonged cuts. The upshot? You get truer circles, better edge quality, and less frustration. Pair it with a sturdy arbor and a sharp pilot bit, keep the speed moderate, and let the teeth do the work—don’t force it.
If you drive a sea of screws, a reliable PZ2 bit is non‑negotiable. CK’s TiN‑coated PZ2 bits come in bulk, which is perfect for pros and busy DIYers. The titanium nitride coating adds a hard, slick surface that reduces heat and wear. Translation: fewer stripped heads, longer bit life, and a smoother driving experience in wood, composite, and light metal applications.
Need to drive hundreds of cabinet screws, decking fasteners, or fixings into studs? These bits shine. The profile fits Pozidriv screws more securely than generic “close enough” tips, cutting down on cam‑out. Use them with an impact driver or a clutch‑controlled drill, and you’ll get consistent results that don’t chew up screw heads or your patience.
Long auger bits are the heroes of clean, deep bores in timber. CK’s long auger in the roughly 3/8‑inch class with an extended length near 12 inches is designed to pull itself through wood thanks to a screw‑point tip, leaving a neat exit and minimal wandering. It’s ideal for routing cables through studs, boring for bolts, or setting up long dowel joints.
Let the screw point feed the bit—no need to muscle it. Keep speed low to moderate, clear chips frequently, and back out briefly on deep runs to avoid heat build‑up. If you’re drilling near edges or into hardwood, a quick pilot start can help. When accuracy matters, begin square to your surface and take a moment to sight your line before committing.
Sometimes the hole or fastener isn’t conveniently accessible. An extension shaft around 13 inches long can be a lifesaver in cabinetry, HVAC, and electrical work. ABB’s M6‑compatible shaft gives you that extra reach while maintaining rigidity, reducing wobble that can cause off‑center entries or chewed screws.
Keep your hands closer to the workpiece to steady the line, and avoid max RPM—extensions magnify any imbalance. Use sharp bits to minimize torque spikes, and consider a pilot hole when precision is critical. Always double‑check that your accessory is firmly locked into the chuck and that the bit is secured in the extension collet before you pull the trigger.
Searching for the right bit kills momentum. A compact CK Bit Clip TX set of 8 keeps Torx drivers visible and at your fingertips. For installers who bounce between T15, T20, and T25 all day, a durable clip that locks bits in place is more than a convenience—it’s workflow insurance.
Torx resists cam‑out brilliantly and is common in decking, automotive, and electronics. Pozidriv gives better grip than Phillips for general carpentry and fixings. Phillips is ubiquitous but more prone to cam‑out under high torque. The trick is matching the bit to the screw head every time and keeping a labeled, accessible set so you never “make do” with the wrong tip.
A robust bit holder might seem minor—until it saves a screw from bouncing into oblivion or keeps an impact bit locked in during a tricky angle. CK’s stainless bit holder with SDS compatibility adds magnetic security and stiffness, so you can drive confidently even when working overhead or in awkward pockets.
Think ladder work, overhead fastening, and tight‑quarters installations. A magnetic holder steadies the screw for a clean start, reducing the embarrassing “first‑thread skate” that damages surfaces. In impact applications, a tough holder also helps absorb shock, protecting both bit and fastener head.
Running earth rods is one of those tasks that can be either a smooth operation or a brutal slog. Linian’s Earth Rod Pro drill bit teams with the SDS Max driver to streamline the process, especially for common rod diameters such as 5/8 inch. The pairing helps cut a clean path and then seat the rod securely without mangling ends or fighting misalignment.
Pre‑drill a pilot path if the soil is compacted or rocky, keep RPM low, and let the driver do the pounding instead of pushing hard. If the site has mixed substrates, step through gradually and check alignment every few inches. A sacrificial cap or driver sleeve keeps the rod head crisp for reliable connections later.
When you need big, clean wood holes fast, the CK Fast4 SDS 1‑1/4‑inch bit brings aggressive fluting and a guided tip to the party. It’s built for high‑volume boring in studs, joists, and beams where you want a tidy entry and a controlled exit.
The guided tip helps keep the bit from wandering, while deep flutes clear chips quickly so you don’t stall mid‑bore. Keep your speed moderate, and you’ll see long ribbon chips fly out, a good sign you’re not burning the wood. For hardwoods, a light touch and steady feed protect edges from tear‑out.
Short PZ2 impact bits—roughly 1‑7/16 inches—are perfect for tight spaces and high‑torque bursts. CK’s impact‑rated profile grips securely and shrugs off the hammering that quickly ruins standard bits. If you’re driving lots of fixings with an impact driver, a couple of stubbies in the pouch is a smart move.
Seat the bit fully and align the driver straight before applying torque. Let the tool pulse—don’t white‑knuckle the trigger. If a screw starts to strip, stop and switch to a fresh bit or a screw extractor rather than forcing it. And remember, shorter bits flex less, which is why stubbies are reliable in high‑torque jobs.
CK’s Blue Steel impact PZ bits are the rough‑and‑ready option when your day is one long stream of fixings. The metallurgy balances hardness and ductility so the tip holds shape while the body resists snapping. A six‑pack means you can rotate bits, keeping heat down and performance up.
If your driver is impact‑rated, your bits should be too—especially in dense wood, composite decking, or self‑tapping metal screws. Standard bits may work in a pinch, but they mushroom or shatter under repeated impacts. Blue Steel is for people who actually plan to finish the job with the same bit they started with.
Need fast, economical holes in studs for cabling, conduit, or plumbing? A CK flat drill bit around 1‑1/4 inches wide and roughly 6‑1/4 inches long is a classic solution. Spade bits hog out material quickly and—used correctly—leave a surprisingly clean entry. For better exits, slow down as you break through or score the exit point first.
Mark both sides of the workpiece and drill halfway from each face to reduce blow‑out. Use steady pressure, and ease up at the end of the cut. If you need a cleaner entry, pre‑score with a utility knife or start with a small pilot. Keep a light touch; spade bits cut so aggressively that rushing only invites tear‑out.
Beyond the headliners above, a few extras can elevate your drilling and driving. A rugged hole saw arbor with a stable pilot reduces chatter on big cuts. Pilot bits with split points start cleaner in metal. A countersink set lets you seat screw heads flush or below surface for a finished look. Depth‑stop collars prevent accidental blow‑throughs when you care about exact depth. And a dab of cutting fluid on metal cuts dramatically extends tool life.
Bit cases that lock, label, and arrange by size keep your workflow smooth. Quick‑change hex shanks speed swaps and reduce downtime, especially when you alternate between drilling and driving on every fastener. If you’re on a ladder or working overhead, quick‑change systems are a gift to your wrists and your schedule.
Every material has a sweet spot. Wood likes sharp tips and fast chip evacuation; augers, spade bits, and guided SDS wood bits excel here. Metal demands slower speeds, firm support, and hard, heat‑resistant edges—think cobalt hole saws and quality pilot bits, with cutting fluid on tougher alloys. Masonry calls for dedicated hammer‑capable bits and drivers, such as SDS and SDS Max systems. Composites behave differently by brand, so test speeds on scrap to prevent melting or tear‑out.
Big diameter equals lower RPM. That’s the rule. Running a large hole saw too fast heats teeth, dulls edges, and scorches material. Impact driving thrives on pulsed torque, not raw speed. For augers, keep the pace steady and let the screw point feed. And on metals, slow and steady wins—cool the cut, clear chips, and be patient.
Prices, stock, and bundles vary across retailers. Using a comparison platform like ZoneOffer lets you line up deals, specs, and availability side by side so you can spot genuine value, not just flashy discounts. Look for transparent specs, trustworthy images, and matching model names so you know you’re comparing like‑for‑like.
Filter by bit profile, diameter, set size, and shank style to get right to what you need. Price trends can reveal whether a “deal” is truly special or just business as usual. And don’t overlook bundles—sets that include a holder, clip, or extra pilot bits often deliver more value than buying one piece at a time.
A minute of care can add hours of service. Wipe bits clean after use, especially after cutting metal or resinous wood. Store hole saws and drivers dry and separated so edges don’t knock together. Inspect tips for rounding or chips; a tired bit is more likely to slip, scorch, or snap.
Some accessories—like spade bits and augers—can be touched up with a file or a dedicated sharpener. Impact bits and many hole saw teeth aren’t worth sharpening; when they’re done, they’re done. Rotate sets so you don’t burn out one piece prematurely. And keep a backup of your most used sizes to avoid unplanned runs mid‑job.
Sharp tools and fast rotation demand respect. Eye protection isn’t optional. Secure the workpiece; a clamped board beats a moving target every time. Keep sleeves tight and hair clear of the chuck. Be mindful of kickback with large hole saws and spade bits—hold the drill with both hands and brace your stance.
Metal edges stay hot and can be razor sharp. Deburr holes promptly, and don’t brush chips away with your palm. Vacuum or sweep shavings before they become slip hazards. If a bit binds, release the trigger and back out gently—don’t fight the tool. A calm, methodical approach is safer and usually faster overall.
Start with a cobalt vari‑pitch hole saw at 5 inches for larger openings, a handful of PZ2 impact bits (including Blue Steel for the tough stuff), a long auger for deep wood bores, a 1‑1/4‑inch SDS wood bit for fast framing jobs, and a 1‑1/4‑inch spade for quick utility holes. Add a stainless magnetic bit holder, a Torx clip set for tidy organization, an extension shaft for reach, and specialized earth‑rod tools if grounding is on your docket. With that lineup—and a smart comparison search to lock in value—you’ll cover the bulk of real‑world tasks with speed, accuracy, and confidence.
The right accessory pays for itself with better results and fewer do‑overs. Before buying, compare price, coating or alloy, geometry, set size, and warranty options across multiple retailers via a comparison site. A few minutes of research often turns a good purchase into a great one.
The difference between struggling through a job and cruising to a clean finish often comes down to accessories. From the CK Pro‑Cobalt 5‑inch hole saw and Fast4 SDS wood bit to Blue Steel impact drivers, long augers, and Linian’s earth‑rod system, each tool has a specific strength that saves time, reduces wear, and boosts quality. Pair them with smart helpers like stainless bit holders, Torx bit clips, and a reliable extension shaft, and you’ll feel the upgrade in every pull of the trigger. Compare deals, check specs, and choose the right fit for your work—and your drill will feel like a brand‑new machine.
| Drill & Screwdriver Accessories - Other | Price | |
|---|---|---|
| Ck Wood Drill Bit 8mm | £ 3,20 | |
| Levello 62mm Hss Hole Saw | £ 12,13 | |
| Armeg Chext300s 300mm Hole Saw Extension Bar | £ 16,26 | |
| Ck Bit Holder Sds Stainless Steel | £ 18,59 | |
| Armeg 4 Piece 1 4 Quick-change Belt Loop Bit Holders | £ 20,63 | |
| Armeg 127mm Cobalt Vari-pitch Hole Saw | £ 33,19 | |
| Armeg 127mm Cobalt Vari-pitch Hole Saw | £ 33,19 | |
| Ck Pro-cobalt Vari Pitch Teeth Hole Saw 127mm | £ 39,26 | |
| Ck 6 Piece Hole Saw Kit For Downlighters | £ 76,68 | |
| Ck 9 Piece Hole Saw Kit | £ 83,22 |
