All categories
Business & Offices
Electronics & Media
Fashion & Accessories
Groceries & Essentials
Health & Personal Care
Home & Living
Kids & Family
Sports & Outdoors
Search in ZoneOffer
Loading...
Picking the right roofing extras is a bit like choosing the right toolkit for a road trip — get the essentials wrong and you’ll end up stranded in the rain. Roofing accessories — from underlay and flashings to vents and ridge tiles — protect the structure, control moisture, and extend the life of your roof. Whether you’re repairing a leak over a 20 ft run or putting in a full replacement on a 30 ft by 12 ft roof, the small bits make a huge difference.
Underlay is the invisible barrier under your tiles or slates. Think of it as a waterproof jacket for your roof that still lets the structure breathe. Breathable membranes stop wind-driven rain while allowing moisture to escape, reducing condensation risk in lofts. For pitched roofs you’ll often see rolls measured in feet — a typical roll might cover roughly 330 ft², enough for a small roof run.
Flashing seals junctions — where a chimney meets the roof or where two different roof pitches intersect. Traditional lead flashing has a long life, but modern alternatives like lead substitutes and pre-formed lead-look flashings can be easier to fit. When replacing flashing over a 3 ft chimney chase, for example, you’ll often need a few linear feet of material plus sealant and fixing straps.
Ridge and hip tiles finish the peak lines and keep out wind and rain. They also give a roof its final neat profile. You’ll choose from dry-fix ridge systems or traditional mortar bedding. Dry-fix kits can save a lot of re-pointing work — one kit usually covers around 10 ft of ridge, so measure your ridge length in feet before buying.
Good ventilation prevents condensation and protects loft insulation. Products include eaves vents, ridge vents, and tile vents. For a medium semi with a 25 ft ridge, a couple of ridge vents plus continuous eaves venting can keep airflow steady. Vents are rated to cover so many square feet of loft space — check that coverage against your loft area measured in feet.
Fixings are small but critical. Corrosion-resistant nails, screws and tile clips keep tiles secure in high winds. For example, stainless steel screws or clips are often recommended in coastal areas where salt air can corrode standard fixings. If you’re replacing tiles over a 12 ft by 12 ft section, budget for several dozen to a few hundred fixings depending on tile type.
Gutters and trim carry water away from your property, preventing damp. Choose materials like uPVC or coated aluminium and match the gutter profile to your roofline. A linear 20 ft gutter run will need fittings, brackets spaced every 2 ft to 3 ft, and end caps; count brackets in feet to avoid last-minute runs to the shop.
Insulation under the roof can be measured in inches of thickness. Loft rolls come in widths sized to fit between joists — most UK joist spaces are around 16 in or 24 in. Remember, a 10 in loft insulation layer will improve thermal performance far more than a thin liner and is a wise use of budget on older homes.
Screwfix is a go-to for tradespeople and DIYers alike. You’ll find a wide range of nails, clips, membrane rolls, and small kits. Their click-and-collect model is handy if you need materials this afternoon for a small repair on a 20 ft roof span. Prices tend to be competitive for basic items and they stock many brands.
Wickes offers a good mix of DIY-friendly products like underlay, dry-fix ridges, and gutters. Their packs and bundles can simplify shopping — for example, an eaves-to-ridge roofing kit will often list coverage in linear feet so you can match it to your roof. Wickes is useful for homeowners doing planned improvements rather than trade-led installs.
B&Q carries a broad range for general roofing jobs — membranes, sealants, and ventilation. They often sell in consumer-friendly pack sizes, making them a practical choice if you need enough for a 10 ft by 10 ft repair. You’ll also find decorative ridge caps and a selection of fascias and soffits here.
These are trade-facing merchants with deeper ranges in specialist materials — think high-performance breathable membranes, profiled roofing sheets, and specialist flashings. If you’re managing a larger job, like reroofing a house with a 30 ft ridge length, their team can advise on quantities and compatibility with Building Regulations.
Selco targets tradespeople and has strong stock levels of fixings, battens, and heavy goods. You’ll find practical bulk options that keep unit prices down for bigger jobs. They’re a sensible choice for a contractor buying for a multi-roof project spanning several hundred square feet.
Toolstation is great for fast access to tools and fixings, while Howdens focuses on kitchens and joinery but supplies relevant roofline materials through trade networks. Both are useful if you need specialist tools like tile cutters or roof hooks on short notice.
Online specialists such as Roofing Superstore and producers of lead alternatives offer niche products like pre-formed flashings, metal roof trims, and premium underlays. These outlets are ideal when you need something specific for an unusual roofline or to match a heritage property.
Comparing roofing extras is about more than price per roll or per tile — you need to factor in lifespan, warranty, and performance. A higher-cost breathable membrane may be worth it if it prevents condensation and extends insulation life. Use comparison sites and customer reviews to check longevity claims and look for suppliers that list coverage in feet so you can do quick maths for your roof size.
Estimating is where many projects go off track. Start by measuring roof length and width in feet, including ridges, hips, and valleys. A simple approach: calculate roof area in square feet, then add 10% to 15% for waste and cuts. For instance, a 25 ft by 12 ft pitched roof panel equals 300 ft²; add 10% and you’ll order around 330 ft² of tiles or underlay. For ridges measure linear feet — a 30 ft ridge will need ridge caps covering roughly that length, plus a small allowance.
Minor jobs like replacing a few cracked tiles or re-fixing slipped flashing can suit a confident DIYer. But anything involving structural elements, large-area membranes, or complex flashings is best left to a qualified roofer. If your job means walking a 40 ft roof plane or dealing with lead work on a 6 in chimney lead apron, professional knowledge will save time and money in the long run.
People often under-order materials or pick the cheapest fixings, only to see problems later. Don’t skimp on corrosion-resistant clips near the coast, and don’t assume all membranes are equivalent — breathability and tear resistance differ. Also, measure twice in feet before ordering: an extra roll is cheaper than an emergency dash to the store.
You can keep costs down by planning and buying in sensible bulk. For a 200 ft² patch, buying a standard roll that covers 330 ft² may actually be more cost-effective than several small rolls. Look for trade packs of nails and clips, and compare online specialist prices with local merchants — sometimes an extra delivery charge offsets a lower online unit price. Another tip: re-use any undamaged ridge tiles or fixings where safe and compliant.
Modern roof builds need to respect ventilation and insulation requirements, which affects the choice of membranes and vents. Building Regulations in the UK require adequate ventilation and energy performance, so choose materials that work together — for example, pairing high-performance insulation that’s a few inches thicker with a breathable membrane to avoid trapping moisture. Reclaimed roof tiles are eco-friendly, but make sure they meet current standards in terms of structural soundness.
Your choice depends on scale and skill. For one-off DIY fixes within a few feet of roof, consumer chains like B&Q and Wickes are convenient. For larger projects that need trade packs, rapid supply, and specialist advice, national merchants such as Travis Perkins, Jewson, or Selco will be better. And for unusual details, online specialists and heritage suppliers can provide specific flashings or profile-matched ridge tiles.
Always walk your roof or inspect it from a secure vantage point and take measurements in feet. Note tile types, ridge lengths, and areas of previous flashing work. Check the condition of battens and underlay where visible. Make a shopping list by category: membranes (rolls by ft²), ridge caps (linear ft), flashings (linear ft), fixings (count or weight), and vents (coverage in ft² of loft). Finally, add a 10% to 15% waste margin — it’s a small buffer that avoids costly deliveries for a few extra feet.
Label everything when it arrives — underlay, nails, ridge kits — and store rolls on a dry flat surface so they don’t crease. Keep a simple record in feet of what’s been used as the job progresses so you can reconcile receipts easily. If something looks off, take a photo and ask a store or supplier for quick advice; many trade merchants are glad to help avoid a bad fit or wasted materials.
Roofing extras are the unsung heroes of a clean, tight, long-lasting roof. With the right accessories, sensible shopping and a little planning measured in feet and inches, you’ll get far more longevity from your roof than chasing the cheapest single product on the shelf.
Whether you’re tackling a small 10 ft by 10 ft patch or overseeing a full 300 ft² reroof, choosing the right stores and materials makes all the difference. Use trade merchants for bulk and specialist shops for niche needs, and always measure in feet before you buy.
Ready to shop? Make a list, measure in feet, and match materials to the life expectancy you want for your roof. A few careful choices now will keep the rain out and your house warm for years to come.
Conclusion: Choosing roofing extras is about balancing quality, price, and suitability for your roofline. With accurate measurements in feet and a shopping plan across the right UK suppliers, you’ll avoid surprises and get the job done well.
| £ 83,33 |
